Atlantic alfea S8 Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Bomba de calor Atlantic alfea S8. Atlantic alfea S8 16 páginas. Alféa s series heat pump air/water split, single service

Imprimir página

Split system

3.2

Appliance start up.

• The installation and 1st start up of the appliance

must be done by a qualified installer. That person will

also give you instructions on starting and running the

appliance.

• Ensure that the installation is fully filled with water

and has been correctly bled and that there is a

sufficient pressure of 1.5 to 2 bars on the manometer

(Ref. 2, figure

4).

• Close the installation's main circuit breaker.

In winter, so that the compressor can be

preheated, close the installation's main circuit

breaker (outdoor unit's power supply) some

hours before pressing the on/off button.

figure 3 - Opening the door

User interface

Manometer (installation

hydraulic pressure)

Start/stop switch

figure 4 - Start-up

figure 5 - Selecting the heating mode (AUTO)

and selecting the DHW operating mode

- 8 -

xxx xxx xxx

Xx xxx xxx

xxx xxx xxx

Xx xxx xxx

xxx xxx xxx

Xx xxx xxx

3.3

Quick start-up

Once your installer has started your installation for the

first time :

• Engage the start/stop switch.

During

the

regulator

the display shows all the symbols and then

"Data, update" and then "State heat pump".

• Select the "AUTO" heating mode

• Select the DHW mode

If the installation is fitted with a DHW tank with electrical

back-up heating :

• Set the current date and time

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Time of day and date

►

Operator section

Time of day and date

Hours / minutes

►

Time of day and date

Hours / minutes

figure 6 - Setting the time and the date

initialisation

(figure

5).

(figure

5).

(figure

6).

Press OK

Choose menu

Time and date

Press OK

Select line:

Hours / minutes

or Day / Month

or Year.

Press OK

Make all

the settings

Press OK

to confirm

each setting.

Press heating mode key

to return to basic display

(n°1, figure

7).

Operation manual "1328 - EN"

phase,