Andrew Alliance Waters OneLab Manual de instalación - Página 6
Navegue en línea o descargue pdf Manual de instalación para Servidor Andrew Alliance Waters OneLab. Andrew Alliance Waters OneLab 8 páginas. Standalone server
Imprimir página
Annex 1: Pairing your connected devices
with OneLab standalone
In case you need to pair the device (e.g. switch from Wi-Fi to Ethernet):
Press 5 times the main button
1
5 times
Connect your computer, tablet or smartphone to your device
3
A. Go to your Wi-Fi settings and select the network named
Andrew-718.xxxx.xxxxx
xxxx.xxxxx is the device serial number
(for Andrew+, you can find it on the door of the Optical Location Module
and for Pipette+ Stand+, you can find it in the back of your device)
B. The LED sign will stop blinking when it's successfully connected.
Launch a web browser, type http://192.168.2.1,
4
follow the on-screen steps to continue installation
and take the steps 5 and 6 in consideration (next page).
2
or
Stand-618.xxxx.xxxxx
http://192.168.2.1
Wait the LED sign to turn blue
and blink
After a couple of minutes, the de-
vice will inform you when it is in
installation mode.