Electrolux EFC 009 X Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Campana de ventilación Electrolux EFC 009 X. Electrolux EFC 009 X 16 páginas. Electrolux cooker hood

Imprimir página

Mounting of hood

First set the telescopic support structure on the

right direction and drill as indicated on the drilling

scheme supplied with the hood.

The two sections of the structure are fixed one

each other with 8 screws (fig. 5- "a").

Remove all screws, regulate the lenght of the

structure according the exigencies, fit again the

8 screws.

In order to install the cooker hood at the right

height consider also that the height of the body

of the hood is 290 and that a minimum distance

from hobs must be in any case respected (see

paragraph "Placement").

Choose how to use the hood:

Exhausting version

Fit a Ø 150 mm exhausting pipe or flex tube on

the ceiling sufficiently long to reach the connec-

tion ring above the hood, once the hood will be

fit on place.

Recirculating version

Fit the deflector from one side of the slots of the

upper section of the telescopic supporting

structure (Fig. 6).

Attention!

Slots used must be those perpendicular to the

top fixing points for chimney unit.

Fix the deflector with bracket supplied and 4

screws 2,9x6,5 (Fig. 6).

Fix the deflector also on the other side of the

structure with two other screws same shape.

From the bottom of the telescopic supporting

structure fit the connection ring supplied

(bajonett attachment- turn clockwise and fix

definitively with one screw 2,9x9,5). (Fig. 7)

Fit a section of pipe or flex tube Ø 150 mm

sufficiently long to reach the connection ring of

the hood once this hood will be fit on place

(Fig. 7).

Fig. 5

Fig. 6

Fig. 7