Bosch 2 Manual del usuario e instrucciones de instalación - Página 4

Imprimir página

Bosch 2 Manual del usuario e instrucciones de instalación

1. Installation Instructions

en Preventing material damage

▶ Take hold of the filter cover after opening

until it no longer swings out.

▶ Close the filter cover slowly.

Risk of injury when opening and closing the

hinges.

▶ Keep your hands away from the hinges.

The light emitted by LED lights is very

dazzling, and can damage the eyes (risk

group 1).

▶ Do not look directly into the switched-on

LED lights for longer than 100 seconds.

WARNING ‒ Risk of electric shock!

If the appliance or the power cord is dam-

aged, this is dangerous.

▶ Never operate a damaged appliance.

▶ Never pull on the power cord to unplug the

appliance. Always unplug the appliance at

the mains.

▶ If the appliance or the power cord is dam-

aged, immediately unplug the power cord

or switch off the fuse in the fuse box.

▶ Call Customer Service. → Page 8

▶ Repairs to the appliance should only be

carried out by trained specialist staff.

2 Preventing material damage

2.1 General

Follow these instructions when using the appliance.

ATTENTION!

Condensate may cause corrosion damage.

▶

To prevent condensation from building up, switch on

the appliance during cooking.

If moisture gets into the controls, this may result in

damage.

▶

Never clean controls with a wet cloth.

Incorrect cleaning damages the surfaces.

▶

Follow the cleaning instructions.

3 Environmental protection and saving energy

Help protect the environment by using your appliance

in a way that conserves resources and by disposing of

reusable materials properly.

3.1 Disposing of packaging

The packaging materials are environmentally compat-

ible and can be recycled.

▶

Sort the individual components by type and dispose

of them separately.

Improper repairs are dangerous.

▶ Repairs to the appliance should only be

carried out by trained specialist staff.

▶ Only use genuine spare parts when repair-

ing the appliance.

▶ If the power cord of this appliance is dam-

aged, it must be replaced by trained spe-

cialist staff.

An ingress of moisture can cause an electric

shock.

▶ Before cleaning, pull out the mains plug or

switch off the fuse in the fuse box.

▶ Do not use steam- or high-pressure clean-

ers to clean the appliance.

WARNING ‒ Risk of explosion!

Highly caustic alkaline or highly acidic clean-

ing agents in conjunction with aluminium parts

in the interior of the appliance may cause ex-

plosions.

▶ Never use highly caustic alkaline or highly

acidic cleaning agents. In particular, do not

use commercial or industrial cleaning

agents in conjunction with aluminium parts,

e.g. grease filter on extractor hoods.

▶

Do not use harsh or abrasive detergents.

▶

Clean stainless steel surfaces in the direction of the

finish only.

▶

Never clean controls with stainless steel cleaners.

Condensation that flows back in may damage the ap-

pliance.

▶

The air extraction duct must be installed with a

gradient of at least 1° from the appliance.

If you put incorrect stress on the design elements, they

may break off.

▶

Do not pull design elements.

▶

Do not place objects on the design elements or

hang objects from them.

Information about current disposal methods are

available from your specialist dealer or local author-

ity.