Bosch 8 Series Manual de instrucciones de instalación y uso - Página 6

Imprimir página

Bosch 8 Series Manual de instrucciones de instalación y uso

Cleaning and maintenance

Lighting

The lighting can be switched on and off independently

of the fan.

Touch the

symbol.

Setting the brightness

Press and hold the

symbol until the required

brightness is reached.

Saturation display

If the metal grease filters or activated charcoal filter are/

is saturated, the corresponding symbols flash once the

appliance has been switched off:

Metal grease filter:

■

Activated charcoal filter:

■

Metal grease filter and activated charcoal filter:

■

and

If you have not yet done so, the metal grease filters

should now be cleaned or the activated charcoal filter

replaced. ~ "Cleaning and maintenance" on page 6

The saturation displays can be reset while they are

flashing. To do this, touch the

Switching over the display for the air circulation

mode

For air recirculation mode, the electronic controller must

be switched over accordingly:

The extractor hood must be connected and switched

■

off.

Touch and hold the

■

selector to change the display to 2. Take your finger

off the

symbol. This switches the electronic

controller over to air recirculation mode (filters that

cannot be regenerated).

Touch and hold the

■

selector to change the display to 3. Take your finger

off the

symbol. This switches the electronic

controller over to air recirculation mode (filters that

can be regenerated).

Repeatedly touching and holding the

■

changing the display to "1" switches the electronic

controller back to air extraction mode.

Audible signal

Switching on

Touch and hold the

time for approximately three seconds when the fan is

switched off. As confirmation, an audible signal sounds

and

is shown in the display.

‚

Switching off

Touch and hold the

time for approximately three seconds when the fan is

switched off. As confirmation,

symbol.

symbol. Use the rotary

symbol and

and

symbols at the same

and

symbols at the same

‹

is shown in the display.

2Cleaning and maintenance

Warning

C l e a n i n g a n d m a i n t e n a n c e

Risk of injury!

Items placed on the appliance may overload the

fasteners, potentially causing the appliance to fall off the

wall.Do not place items on the appliance.

Warning

Risk of electric shock!

Penetrating moisture may result in an electric shock.

Clean the appliance using a damp cloth only. Before

cleaning, pull out the mains plug or switch off the circuit

breaker in the fuse box.

Warning

Risk of electric shock!

Do not use any high-pressure cleaners or steam

cleaners, which can result in an electric shock.

Warning

Risk of injury!

Components inside the appliance may have sharp

edges. Wear protective gloves.

Warning

Risk of injury!

If appliances supported by cables are permitted to

swing to and fro, this may overload the fasteners,

potentially causing the appliance to fall off the wall.Do

not do anything that makes the appliance swing to and

fro.