Daikin 2MXS40H2V1B Manual de instalación - Página 16

Navegue en línea o descargue pdf Manual de instalación para Bomba de calor Daikin 2MXS40H2V1B. Daikin 2MXS40H2V1B 20 páginas. Split series

Maximum Power Input Limitation Setting

WARNING

Always shut off the power supply breaker before starting.

• The Maximum Power Input Limitation needs to be set when the unit is installed.

• This function limits the power input of the unit to 1700W.

• It is recommended for locations with low-capacity circuit breakers.

CAUTION

This function is only for the 2MKS40 and 2MKS50.

• Set as follows.

1) Remove the two screws on the side and remove the top plate of the outdoor unit.

2) Remove one screw from the upper electric box cover.

3) Remove the upper electric box cover by sliding it, being careful not to bend the electric box hook.

4) Remove the lower electric box cover.

5) Cut the jumper (J4) of the PCB inside.

6) Go back through step 4) → 3) → 2) → 1). Make sure all components are well secured when doing this.

1) Remove the

two screws.

Fan motor lead wire

Hook

3) Remove the upper

electric box cover

from the hook.

CAUTION

• When removing the upper electric box cover, be careful not to bend the hook.

• When returning the lower electric box cover, return the notch to the stop valve side.

• When returning the upper electric box cover, be careful not to pinch the fan motor lead wire.

■English

Upper electric

box cover

Lower electric

box cover

Top plate

PCB

5) Cut jumper J4.

2) Remove the

one screw.

4) Remove the lower

electric box cover.

Notch

Electric box

PCB