Bosch B26FT series Instrucciones de uso e instalación - Página 8

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Frigorífico Bosch B26FT series. Bosch B26FT series 32 páginas.

en-us

Electrical connection

WARNING

Risk of electric shock and fire if electrical

connection is not installed properly!

Plug into a fixed, grounded 3-prong outlet only. The

outlet must be installed and grounded according to

code by a qualified electrician. If necessary, have

the installation inspected by a qualified technician

to ensure it is properly grounded.

Do not use an extension cord or power strip.

Never connect the appliance to an electronic

energy saver plug (such as Ecoboy, Sava Plug,

etc.) or to power inverters which convert direct

current (DC) to alternating current (AC) (such as for

solar equipment, power supplies on ships, etc.).

The outlet for the appliance must be located close the

appliance and must be easy to access also after

installation.

Connect the appliance to a properly installed

115 V/60 Hz AC outlet. The fuse for the outlet must be

rated either 15 A or 20 A.

If the appliance is to be used in a country other than

the U.S., check the rating plate to determine if the

specified voltage and current type correspond to the

ratings of your power supply. If the voltage and current

type do not match, the appliance must not be

operated. The power cord may only be replaced by a

qualified electrician.

Aligning the appliance

NOTICE

To ensure that the appliance operates correctly, use

a level to align the appliance.

If the appliance is not level, water may flow out of the

ice maker, ice cubes may be irregular, or the doors

may not close properly.

1. Place the appliance in the designated location.

2. Remove the three screws from the base panel.

3. Remove the base panel.

4. Use a 36 mm open end wrench to loosen the two

front feet until they are firmly planted on the floor

and then align the front of the appliance.