Daikin Altherma 3 GEO EGSAX10UDA9W Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Bomba de calor Daikin Altherma 3 GEO EGSAX10UDA9W. Daikin Altherma 3 GEO EGSAX10UDA9W 16 páginas.
Imprimir página
Item
h Main zone
h1 Installed room thermostat type:
Unit operation is decided based on the ambient
temperature of the dedicated Human Comfort
Interface (BRC1HHDA used as room thermostat).
Unit operation is decided by the external room
thermostat (wired or wireless).
—
No room thermostat installed or set. Unit operation
is decided based on the leaving water temperature
regardless of the actual room temperature and/or
heating demand of the room.
h2 Installed heat emitter type:
Underfloor heating
Fancoil unit
Radiator
21
h3
Measured room temperature
45
h4
Leaving water temperature setpoint
i
Holiday mode
Holiday mode active
j
Additional zone
j1 Installed room thermostat type:
Unit operation is decided by the external room
thermostat (wired or wireless).
—
No room thermostat installed or set. Unit operation
is decided based on the leaving water temperature
regardless of the actual room temperature and/or
heating demand of the room.
j2 Installed heat emitter type:
Underfloor heating
Fancoil unit
Radiator
18
j3
Leaving water temperature setpoint
k Malfunction
A malfunction occurred.
See
"6.1 To display the help text in case of a
malfunction" [ 4 13] for more information.
(1)
If the corresponding operation (for example: space heating)
is not active, the circle is greyed out.
3.2.2
Main menu screen
Starting from the home screen, press (
left dial to open the main menu screen. From the main menu, you
can access the different setpoint screens and submenus.
2
Malfunctioning
Room
Main zone
Additional zone
Space heating/cooling
a
Selected submenu
Possible actions on this screen
Go through the list.
Enter the submenu.
Enable/disable breadcrumbs.
EGSAH/X06+10(U)DA9W(G)
Daikin Altherma 3 GEO
4P569812-2B – 2019.10
Description
(1)
(1)
(1)
) or turn (
) the
a
Submenu
[0]
Restriction: Only displayed if a
or
malfunction occurs.
Malfunctioning
See
case of a
information.
[1]
Restriction: Only displayed if a
Room
dedicated Human Comfort Interface
(BRC1HHDA used as room
thermostat) is controlling the indoor
unit.
Set the room temperature.
[2]
Shows the applicable symbol for your
Main zone
main zone emitter type.
Set the leaving water temperature for
the main zone.
[3]
Additional zone Restriction: Only displayed if there
are two leaving water temperature
zones. Shows the applicable symbol
for your additional zone emitter type.
Set the leaving water temperature for
the additional zone (if present).
[4]
Shows the applicable symbol of your
Space heating/
unit.
cooling
Put the unit in heating mode or cooling
mode. You cannot change the mode
on heating only models.
[5]
Set the domestic hot water tank
Tank
temperature.
[7]
Gives access to user settings such as
User settings
holiday mode and quiet mode.
[8]
Displays data and information about
Information
the indoor unit.
[9]
Restriction: Only for the installer.
Installer
settings
Gives access to advanced settings.
[A]
Restriction: Only for the installer.
Commissioning
Perform tests and maintenance.
[B]
Change the active user profile.
User profile
[C]
Turn heating/cooling functionality and
Operation
domestic hot water preparation on or
off.
3.2.3
Setpoint screen
The setpoint screen is displayed for screens describing system
components that need a setpoint value.
Examples
[1] Room temperature screen
1
+
21
°C
–
Room
[3] Additional zone screen
3
+
45
°C
–
Additional zone
3 Operation
Description
"6.1 To display the help text in
malfunction" [ 4 13] for more
[2] Main zone screen
2
+
35
°C
–
Main zone
[5] Tank temperature screen
5
+
50
°C
–
Tank
Operation manual
5