DRI Sleeper Eclipse Manual de inicio rápido - Página 3
Navegue en línea o descargue pdf Manual de inicio rápido para Productos de cuidado personal DRI Sleeper Eclipse. DRI Sleeper Eclipse 4 páginas.
También para DRI Sleeper Eclipse: Manual de instrucciones (11 páginas)
Imprimir páginaHow to place the sensor
STEP 3
The alarm triggers when moisture gets between the black
sensing strips on the sensor. Place the sensor close to the wee
spot so it detects bedwetting quickly.
Recommended method: in a women's small sanitary pad
Cut the top off the pad or cut a pocket into it.
1
Insert the sensor into the absorbent padding under the top
2
layer of the pad with the black sensing strips facing the body.
Stick the pad into the crotch of your child's underwear so
3
the sensor is close to the wee spot.
Note: Avoid touching the black sensing strips with your fingers as skin
humidity can cause the alarm to trigger.
Alternative methods:
Between 2 snug-fitting pairs of undies
Wrap the senor in a piece of toilet paper to help it
stay in place near the wee spot and wick the urine
between the sensing strips.
Inside a small opening cut inside a diaper near the wee spot
Insert the sensor into the absorbent padding
below the top layer with the black sensing strips
facing the body. Wrap the sensor in a piece of toilet
paper to help it stay in place near the wee spot and
wick the urine between the sensing strips.
Note: Avoid nappies with absorbent gel as they can stop moisture
getting to the sensor and cause sticky deposits to form on the sensor
which will need to be cleaned off with a gentle brush in cold soapy water.