Atlantic Technology 8200 System Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Subwoofer Atlantic Technology 8200 System. Atlantic Technology 8200 System 20 páginas. Pedestal subwoofer systems
También para Atlantic Technology 8200 System: Manual de revisión (3 páginas), Manual de instrucciones (12 páginas)
Imprimir página
Instruction Manual
Amplifier Front Panel
Figure 6
�������� ����������
�
�
�
�
� � � � � � � � �
� � �
� � � � � �
NOTE: Items in gray area are found on SA-8200 amplifier only
1
LEVEL TRIM display window
Indicates amount of trim adjustment applied above or below the
reference volume setting of your PedWoofer.(page 14)
2
FREQUENCY
FREQUENCY EQ
FREQUENCY EQ
control
Selects the frequency to be adjusted by the parametric
equalizer.(page 13)
3
WIDTH EQ control
Selects how wide a range of frequencies will be adjusted by the
parametric equalizer.(page 13)
4
ATTENUATION EQ control
Reduces the woofer's output at those frequencies selected by the
parametric equalizer.(page 13)
5
Program Equalization indicators
Light indicates selected Reference or EQ program.(page 14)
6
Main Power switch
Turns amplifier on or off.(page 12)
1
2
3
�������� ��
�
����� ����
�
��
���
��
���
���
�� �
�
�
�
���
���������
�����
��
���
����
�
��������
�
��
��� ���
5
6
7
8
4
�����
��� ����
�� ���
��
���
�
���
��
���
���
���
���
��� � ���
�����������
�� ���
��
���
�
���
��
���
��� ���
���
��� � ���
9
10
7
MUTE indicator
Lights when amplifier volume is muted.(page 7 and 18)
8
ON/STDBY indicator
Lights green when the amplifier is operating and turns yellow
when the amplifier is in standby mode.Turns red to indicate that
amplifier has entered protection mode.(pages 7 and 12)
PHASE control
9
Sets correct PedWoofer phase (0°,90°,180°,or 270°) to best match
your satellite speakers and room.(pages 12 and 14)
10
LOW PASS crossover control
Sets the low frequency crossover between the PedWoofers and your
satellite speakers. A detent is provided for the THX/EXT setting.
(pages 12 and 14)
BASS LEVEL control
11
Sets the reference volume level of the connected PedWoofers.
A detent is provided for the THX/REF setting.(pages 13 and 14)
Amplifier Front Panel
���� �����
��������� �
�
���
���
�
��� � ���
��������� �
�
���
���
�
��� � ���
11
5
�������
����� ����������
��������� ���������