Atlantic Technology PBM2 Manual de instrucciones
Navegue en línea o descargue pdf Manual de instrucciones para Subwoofer Atlantic Technology PBM2. Atlantic Technology PBM2 2 páginas. Powered bass module with priority auto-sensing
PBM2
Powered Bass Module
with Priority uto-Sensing
Package Content
Your PBM2 Powered Bass Module ships with
this Instruction Manual and the following items:
NOTE:
Please contact Customer Service if any of these items are missing.
PBM2 Powered Bass Module with Priority Auto-Sensing
Congratulations on your new Atlantic Technology PBM2. e PBM2 features some in-
novative features not typically found on a powered subwoofer. Please read this set up
guide to be sure of trouble free operation.
Priority Auto-Sensing (PAS) and Source Selection
e PBM2 has a Priority Auto-sensing circuit that will allow you hands-free operation.
It works by looking for a signal on the "A" or "priority" input. Any time there is audio
going to the A input the PBM2 will select that input. In addition the PBM2 has a delay
before switching from the "A" input to the "B" input. is is to ensure the PBM2 does
not switch during loading screens, quiet passages during films, any delays in streaming
content or the quiet pause before a commercial break. e delay is approximately 15-20
seconds long.
If you want to use the "B" input, you should either mute or turn off the device plugged
into the "A" input.
If you are sending audio to the "B" input and you wish to switch to the "A" input simply
unmute or turn on the second audio device. e PBM2 will instantly switch back to the
"A" input.
Controlling the Volume Level
To further simplify operation the PBM2 does not have a main volume control. Instead
you can use the TV or mobile device volume control.
Bass and Treble
e PBM2 has a bass volume control and a high frequency level control. We realize not
every room will sound the same and not every person has the same taste in how their
system sounds. To balance the bass first use a good music source. Now turn the volume
on the mobile device or TV up to slightly above your normal listening levels. Now use
the Bass knob on the back of the PBM2 to increase or lower the bass from the subwoofer.
Now you can turn down the volume using the TV remote or your phone/tablet.
e high frequency level control allows you to adjust the treble of your le and right
speakers. e control will alter the output from about 10k up. You can increase or de-
crease the treble by as much as 5db.
To maximize the bass output, check out the Atlantic Technology website in the learning
center for "speaker placement guide"
Speaker Output
In addition to the 130 watt subwoofer amp, the PBM2 also features a two channel 40w
amp to power a pair of speakers like the LCR2 or LCR3. ese speakers should have an
impedance of no less than 4 ohms.
Blue Tooth
e PBM2 also includes an optional BTR Bluetooth receiver. e amp features a con-
venient 5v USB connection for the BTR. Do not use this to charge mobile devices or
connect to a computer as damage may result to one or more device.
To use the BTR simply plug the BTR into the PBM2 amp and use the supplied right
angle 3.5mm to 3.5mm connection. e device should appear as "Atlantic Tech BTR"
in the pair menus on your mobile device.
Connections
We have included a variety of connection options. Please examine the connections dia-
gram for more information.
Specifications
• Bass Driver: 6.9˝ composite Poly/paper
• Subwoofer Amp: 130 watts into 4 ohms
• Distortion: <0.4%
• Frequency Response: 35hz to 200hz
• HF Control: ±5db @20k, ±3db @15k
• Speaker Output: 40w x2 into 4 ohms
• Inputs: 2x 3.5mm analog
• Dims: 15˝ x 7.75˝ x 9˝ (381mm x 196mm x 228mm)
• Weight: 13 pounds (5.9 kg)
Safety Precautions
CAUTION:
To reduce the risk of electric shock, do not remove the cover
(or back). No user serviceable parts inside. Refer to qualified personnel.
WARNING:
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture. is device generates a fair amount of heat.
Make sure nothing blocks the ventilation to the rear panel of the unit.
e lightning flash with arrowhead, within an equilateral tri-
angle, is intended to alert the user to the presence of uninsu-
lated "dangerous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a risk of electrical
shock to persons.
e exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating main-
tenance (servicing) instructions in the literature accompanying
the appliance.
e contents of this manual are Copyright © 2016 by Atlantic
Technology International, Corp., and may not be duplicated or
reproduced by any means, whether physical, electronic or oth-
erwise without prior written consent from Atlantic Technology
International, Corp.
Atlantic Technology and the Atlantic Technology logo are registered trade-
marks of Atlantic Technology International, Corp.
Specifications are those in effect at the time of printing. Atlantic Technology
International, Corp. reserves the right to change specifications or designs at
any time without notice without obligation to modify existing units.
Safety Instructions
• Read these instructions.
the operating instructions as an improper ad-
justment of other controls may result in dam-
• Keep these instructions.
age and will oen require extensive work by
• Heed all warnings.
a qualified technician to restore the apparatus
• Follow all instructions.
to its normal operation.
• Do not use this apparatus near water.
• Damage Requiring Service. Unplug the appa-
• Clean only with dry cloth.
ratus from the wall outlet and refer servicing
to qualified service personnel under the fol-
• Do not block any ventilation openings. Install
in accordance with the manufacturer's in-
lowing conditions: When the power-supply
cord or plug is damaged; If liquid has been
structions.
spilled, or objects have fallen into the appara-
• Do not install near any heat sources such as
tus; If the apparatus has been exposed to rain
radiators, heat registers, stoves, or other appa-
or water; If the apparatus does not operate
ratus that produce heat.
normally by following the operating instruc-
• Protect the power cord from being walked on
tions; If the apparatus has been dropped or
or pinched particularly at plugs, convenience
damaged in any way, and; When the appara-
receptacles, and the point where they exit from
tus exhibits a distinct change in performance
the apparatus.
this indicates a need for service.
• Only use attachments/accessories specified by
• Object and Liquid Entry. Never push objects
the manufacturer.
of any kind into the apparatus through open-
• Unplug this apparatus during lightning storms
ings as they may touch dangerous voltage
or when used for long periods of time.
points or short-out parts that could result in a
• Refer all servicing to qualified services person-
fire or electric shock. e apparatus shall not
nel. Servicing is required when the apparatus
be exposed to dripping or splashing and no
has been damaged in any way, such as power-
objects filled with liquids, such as vases shall
supply cord or plug is damaged, liquid has
be placed on the apparatus. Don't put candles
been spilled or objects have fallen into the ap-
or other burning objects on top of this unit.
paratus, the apparatus has been exposed to
• e power supply and power cord for this ap-
rain or moisture, does not operate normally,
paratus is intended for indoor use only.
or has been dropped.
• Only use the included A/C adaptor
• Adjust only those controls that are covered by
FCC Compliance
is device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including
interference that may cause undesired operation
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
is equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. ese limits
are designed to provide reasonable protection against harmful interference
in a residential installation. is equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the in-
structions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm
or more should be maintained between this device and persons during
device operation.
To ensure compliance, operations at closer than this distance is not recom-
mended. e antenna used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.
Troubleshooting Guide
Once your subwoofer is set up, you should have many
years of maintenance free enjoyment from your system.
However, if you should encounter a problem, refer to
the following guide to help you find the solution. If a
problem persists, you should contact your local author-
ized Atlantic Technology dealer.
Problem
Solutions
PBM2 LEDs
a. Check power cord is
are not lit.
correctly plugged in to
the wall and the unit.
b. Turn the PBM2 on.
PBM2 has no
a. Check the source for
output, LEDs
mute or volume level.
are green.
b. Check speaker
connections at both
the PBM2 and the
speakers.
PBM2 is on,
a. Check the bass volume
LED is green and
control on the PBM2.
source is OK, but
there is no bass.