Dri-Eaz Dragon K85 Mobile Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Horno Dri-Eaz Dragon K85 Mobile. Dri-Eaz Dragon K85 Mobile 14 páginas. Dri-eaz dragon k85 mobile furnace owner's manual
También para Dri-Eaz Dragon K85 Mobile: Manual del usuario (20 páginas)

Imprimir página

1. When the Dragon is plugged in and the HEAT

switch is first turned on, the thermostat will display

the ambient temperature.

Before programming, the thermostat shows the current ambient temperature

2. Press the SET key once to access the

Fahrenheit/Celsius mode. The display will show

the current status, either F for Fahrenheit or C for

Celsius. To switch between the two, press either

arrow key. Choose either F or C.

Choose either Fahrenheit (F) or Celsius (C) mode

07-00407F 02/2008

2. Press the SET key again to access the setpoint.

The display will blink "S1" and show the current

setpoint in degrees. The setpoint is the maximum

temperature you wish to maintain in the affected

area.

For example, with a setpoint of 85°F, the Dragon

will stop heating when the temperature exceeds

85°F.

Use the arrows to choose a setpoint.

Use the arrows to choose a setpoint

3. Press the SET key again to access the differential.

The display will blink "DIF 1" and show the current

differential. The differential is the number of

degrees the temperature will drop below the

setpoint before the Dragon begins a heating cycle.

In other words, the differential determines the

minimum temperature of the affected area.

For example, with a setpoint of 85°F and a

differential of 5, the Dragon will begin a heating

cycle when the temperature of the affected area

drops below 80°F.

Press the up or down arrow keys to select a

differential. You can select a differential from 1°F

to 30°F.

Use the arrows to select a differential