Dri-Eaz DefendAir HEPA 500 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Limpiador de aire Dri-Eaz DefendAir HEPA 500. Dri-Eaz DefendAir HEPA 500 5 páginas. Air scrubber
También para Dri-Eaz DefendAir HEPA 500: Manual del usuario (6 páginas), Manual del usuario (5 páginas)

Imprimir página

TROUBLESHOOTING

PROBLEM
Unit does not operate
Change light illuminated
For any problems not described here, please contact your local distributor for assistance.
WARNING: Because federal, provincial and local laws and regulations have varying requirements for the
application, testing and general use of equipment on asbestos abatement projects, Legend Brands, Inc., cannot
warrant the use of any product we manufacture for asbestos abatement. Contractors performing abatement work should
evaluate tools, equipment and procedures in light of their local regulatory requirements, and comply with those
requirements.
SPECIFICATIONS
Model
HEPA 500 (F284-230V)
Weight
19.9 kg | 44 lbs.
Dimensions
62.5 × 66.5 × 46.2 cm
(D × W × H)
24.6 × 26.2 × 18.2 in.
Duct sizes
Intake: 12 in. Outlet: 8 in.
Power
1.5A, 230V, 50 Hz
Air movement
331–431 CFM
Filter system
Up to two prefilters and one HEPA filter.
Controls
On/Off switch, variable speed control knob
Power cord length
7.63 m | 25 ft.
Construction
Rotomolded polyethylene housing
Safety
CE listed
Specifications are subject to change without notice. Some values
may be approximate.
07-01496D F284-230V UK/EU
LIRE ET CONSERVER CES INSTRUCTIONS
CAUSE
1.
No power to machine
2.
Switch not turned on
3.
No power at supply outlet
4.
GFCI tripped
1.
Primary (HEPA) filter is full
2.
Air intake restricted by ducting
bends, kinks, or excessive
length
SOLUTION
1.
Plug in the unit; check power at outlet
2.
Turn on the switch
3.
Reset supply circuit breaker/GFCI
4.
Reset unit circuit breaker/GFCI
1.
Replace the HEPA filter
2.
Eliminate bends/kinks in ducting; reduce ducting
length.
5
Legend Brands Europe Holdings Ltd.