Atlantic Ultraviolet Sanidyne Instalación Funcionamiento y mantenimiento - Página 4

Navegue en línea o descargue pdf Instalación Funcionamiento y mantenimiento para Accesorios Atlantic Ultraviolet Sanidyne. Atlantic Ultraviolet Sanidyne 16 páginas. Portable area sanitizer
También para Atlantic Ultraviolet Sanidyne: Manual del usuario (12 páginas)

Imprimir página

PRODUCT APPLICATIONS

C
onstruCtion
The Sanidyne
Portable Area Sanitizer consists of:
®
•
Germicidal ultraviolet lamps (05-0592) - Deliver ultraviolet energy at the specific wavelength of 254 nanometers (nm). This
wavelength is highly effective against microbes including: virus, bacteria, and mold spores.
•
Electronic ballasts - available in 120v 50/60Hz or 230v 50/60Hz.
•
Timer - A microprocessor controller provides easily programmable treatment times in minutes and hours (up to 24 hours), to
suit a variety of room sizes.
•
Exit Warning and Time Delay - Provides an audible warning for 3 minutes after the start button is pushed, allowing the
operator time to leave the area before the disinfection cycle begins.
•
Elapsed Time Indicator - A non-resettable display of the operating hours. useful for scheduling and recording maintenance
and lamp replacement.
•
Power Cord - For 120VAC 50/60Hz single-phase standard household current, a NEMA 5-15, three-prong plug is provided for
a properly grounded outlet. 230VAC 50/60Hz models use a CEE 7/7 (Schuko type) plug.
•
Storage Cover - Protects the germicidal lamps from breakage while transporting and/or storing the sanitizer and provides a
way to safely test the ultraviolet lamp operation.
•
Sight Ports - Located on the top cover, allow observation of the germicidal lamps without the risk of ultraviolet exposure
when the storage cover is on.
•
Lamp Guard Assembly - Protects lamps from damage during normal operation.
•
All electronics and wiring are housed in an enclosure constructed of stainless steel. Stainless steel construction provides
strength, durability and will withstand most harsh environments.
P
o
rinCiPle of
Peration
The Sanidyne
design has been carefully conceived to provide direct germicidal ultraviolet exposure for air or surface
®
disinfection in unoccupied space to disinfect and prevent areas and surfaces from microorganisms. The ultraviolet disinfection
dosage is a function of time and the intensity, of the ultraviolet radiation to which the air and surrounding surfaces are exposed.
caution:
It is the user's responsibility to determine and validate the suitability of the equipment for use in
application. No warranty or representation is made by the manufacturer with respect to suitability or performance of this
equipment or to the results that may be expected from its use. Indoor Use Only – The equipment must be sheltered from
exposure to the elements and extremes in temperature. Temperature range: 40°F to 100°F. The user should periodically
inspect, clean as necessary and confirm the presence and good legibility of the product safety labels. Contact the factory
for replacement labels in the event that any of the labeling is missing or illegible.
l
imitations
•
Safety procedures should be implemented to prevent ultraviolet exposure of occupants to direct or reflected ultraviolet rays.
Exposure to germicidal ultraviolet rays will result in the irritation of the eyes and reddening of the skin.
•
Personal protection equipment is required when entering the irradiated space with the germicidal lamp(s) operating. Personal
protection equipment includes skin and eye protection such as gloves, long sleeves with no gaps between cuff and gloves, and
an ultraviolet blocking faceshield (included with the purchase of the Sanidyne

UNPACKING

•
Remove the Sanidyne
•
Atlantic Ultraviolet Corporation takes all possible precautions when packaging this unit to prevent damage. Carefully inspect
the unit, power cord and plug for damage, report all damage immediately. Do not assemble or operate if there is any damage,
visible or suspected.
•
Germicidal lamps are packed separately, to ensure maximum protection for the lamps. Keep the lamps aside until ready for
installation.
•
Carefully inspect all packing materials to prevent the loss of accessories, spare parts or instructions.
•
Do not discard packing materials until sanitizer is assembled and proper operation is confirmed.
Continued on Page 5
from its shipping carton.
®
).
®
4