Atlantic Ultraviolet Sanidyne 40-0674B Instalación Funcionamiento y mantenimiento - Página 5
Navegue en línea o descargue pdf Instalación Funcionamiento y mantenimiento para Accesorios Atlantic Ultraviolet Sanidyne 40-0674B. Atlantic Ultraviolet Sanidyne 40-0674B 20 páginas. Germicidal ultraviolet portable area sanitizer
PRODUCT APPLICATIONS
C
onstruCtion
The Sanidyne
Prime Remote Portable Area Sanitizer consists of:
®
• STER-L-RAY
Germicidal ultraviolet lamps: Deliver ultraviolet energy at the specific wavelength of 254 nanometers (nm).
®
This wavelength is highly effective against microbes including virus, bacteria, and mold spores. Germicidal ultraviolet rays are
harmful to eyes and skin; avoid exposure of direct or reflected germicidal ultraviolet rays without approved ultraviolet blocking
face shield and protective covering (such as gloves, long sleeves with no gaps between cuff and gloves).
• Audible Exit Warning Alarm: To alert area that the lamps will be powered on in one minute and thirty seconds after the start
button is pressed or to indicate intruder is in Operation Area.
• Elapsed Time Indicator: A non-resettable display of the operating hours. Useful for scheduling and recording maintenance
and lamp replacement.
• Hand-Held Remote Controller: Provides easy operation of Sanidyne
operation, controls treatment times and alerts operator with an audible alarm if an intruder enters Operation Area.
• Keypad Controller: Provides easy operation of Sanidyne
minute and thirty seconds) to leave the Operation Area before treatment begins.
• Intruder Sensors: Delay treatment if the Operation Area is inhabited. Additionally if sensors detect an intruder with less than
30 seconds left before lamps operate, the countdown time will automatically restore back to 30 seconds until area is cleared.
• Power Cord: For 120v AC 50/60Hz single-phase standard household current, a NEMA 5-15, three-prong plug is provided for a
properly grounded outlet. 230v AC 50/60Hz models use a CEE 7/7 (Schuko type) plug. (Consult factory for other plug types).
• Stainless Steel Lamp Guard Assembly: Protects lamps from damage during normal operation.
• Stainless Steel Construction: All electronics and wiring are housed in an enclosure constructed of stainless steel, providing
strength and durability in order to withstand most harsh environments.
• Sanidyne
Prime Remote will operate between 120v 50/60Hz and 250v 50/60Hz.
®
P
o
rinCiPle of
Peration
The Sanidyne
Prime Remote design has been carefully conceived to provide direct germicidal ultraviolet exposure for air and
®
surface disinfection in unoccupied areas to disinfect and prevent areas and surfaces from microorganisms. Ultraviolet disinfection
dosage is a function of time and the intensity, of the ultraviolet radiation to which the air and surrounding surfaces are exposed.
NOTE: The Sanidyne
Prime Remote should be used as a supplement to your facility's cleaning and disinfection protocols,
®
not as a replacement. Follow your facility's cleaning and disinfection protocols before using the Sanidyne
No special room preparation is required prior to treating a room or area with the Sanidyne
surfaces must be directly exposed to the UV rays. These rays will not penetrate materials like cloth, paper or ordinary glass,
therefore, it is important to remove items from the direct line of sight that would block or shield the rays from other surfaces. The
Sanidyne
Prime Remote does not generate any harmful byproducts, nor does it leave any residual substances.
®
It is the user's responsibility to determine and validate the suitability of the equipment for use in system
or process. No warranty or representation is made by the manufacturer with respect to suitability or performance of this
equipment or to the results that may be expected from its use.
Indoor Use Only – The equipment must be sheltered from exposure to the elements and extremes in
temperature. Temperature range: 40°F to 95°F. The user should periodically inspect, clean as necessary and confirm the
presence and good legibility of the Product safety labels. Contact the factory for replacement labels in the event that any of
the labeling is missing or illegible.
The UV Treatment Results achieved are subject to variations in application conditions, it is recommended
that culture tests be performed to confirm desired outcomes.
l
imitations
• Safety procedures MUST be implemented to prevent ultraviolet exposure of occupants to direct or reflected ultraviolet rays.
Exposure to germicidal ultraviolet rays will result in the irritation of the eyes and reddening of the skin.
•
Personal protection equipment is required when entering the irradiated space with the germicidal
lamp(s) operating. Personal protection equipment includes skin and eye protection such as
gloves, long sleeves with no gaps between cuff and gloves, and an ultraviolet blocking face
shield (included with the purchase of the Sanidyne
Prime Remote from a safe distance, displays lamp
®
Prime Remote and allows the operator a period of time (one
®
Prime Remote).
®
Prime Remote.
®
Prime Remote — however, target
®
5