Electrolux RH36PC60G S Especificaciones del producto - Página 2
Navegue en línea o descargue pdf Especificaciones del producto para Campana de ventilación Electrolux RH36PC60G S. Electrolux RH36PC60G S 2 páginas. Glass canopy island hood
Glass Canopy Island Ceiling-Mount Hood
RH36PC60G S
36" Glass Canopy Island
Ceiling-Mount Hood Specifications
Product Weight – 84 Lbs.
•
Island / Peninsula Installation
•
Ventilation system is preset to exhaust air outside. If outside ducting is
•
not possible, optional Duct-Free Kit (PN # RHDFP60GS) is available to
convert ventilation to allow air to recirculate inside. (Refer to Ducted
Option Specifications for outside ventilation.)
Sones Rating – 9.9
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 0.516 kW (For use on
•
adequately wired 120V, dedicated circuit having 2-wire service with a
separate ground wire. Appliance must be grounded for safe operation.)
Amps @ 120 Volts = 4.16 Amps
•
Always consult local and national electric codes. Check local
•
building codes for installation requirements, as they may vary per locale.
Minimum installation height allowed from bottom of hood to cooking
•
surface is 24" - 30" for electric and 30" for gas. (NOT more than 36"
recommended.)
To prepare mounting surface, adequate structure and support must be
•
provided, capable of supporting 150 lbs.
Ducted Option Specifications
For outside ventilation.
•
Exhaust Duct Required – 8" round
•
For most efficient airflow exhaust, use a straight run or as few elbows
•
as possible.
Electrolux Major Appliances, N.A.
5855 Terry Fox Way
Mississauga, ON L5V 3E4
CANADA
•
•
RH36PC60GS 12/10
Use metallic flex ducting only to connect rigid duct directly to transitions
•
(if allowed by code).
Thermal breaks such as short section of nonmetallic duct, should
•
be used in areas of extreme cold.
Cold weather installations should have additional backdraft damper
•
installed.
Refer to installation instructions on web for detailed exhaust duct
•
preparation and converting vent blower system for recirculating inside.
Pre-Installation Calculations
Select hood preference height (P) that is comfortable for user
•
(24" - 30" minimum allowed, NOT more than 36" recommended).
Calculate hood height (H) for installation (H = K-C-P).
•
Confirm that (H) is within minimum to maximum range for hood.
•
If not, adjust installation.
Calculate chimney structure height (S). Use formulas, check
•
dimensions of hood. Save calculation for use later in installation.
Note: For planning purposes only. Refer to Product Installation Guide
Optional Accessories
Duct-Free Kit (Single Pack) – (PN # RHDFP60GS).
•
1-800-265-8352
electroluxappliances.ca
•
•
© 2010 Electrolux Home Products, Inc.
on the web at electroluxappliances.ca for detailed instructions.
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Printed in Canada