Bosch Series 4 Manual del usuario e instrucciones de instalación - Página 36

Imprimir página

Bosch Series 4 Manual del usuario e instrucciones de instalación

en Installation instructions

19.3 Installing the appliance below a

worktop

¡ To ventilate the appliance, the intermediate floor

must have a ventilation cut-out.

¡ Secure the worktop to the built-in unit.

¡ Observe the installation instructions for the hob.

19.4 Installation in a tall unit

¡ To ventilate the appliance, the intermediate floor

must have a ventilation cut-out.

¡ If the tall unit has another back panel in addition to

the element back panels, remove this.

¡ Only fit the appliance up to a height which allows

accessories to be easily removed.

19.5 Corner installation

¡ Observe the minimum dimensions in a corner in-

stallation in order to be able to open the cover of

the appliance. The dimension

thickness of the furniture panel and the handle.

depends on the

19.6 Electrical connection

In order to safely connect the appliance to the elec-

trical system, follow these instructions.

¡ Before using the appliance for the first time, you

must ensure that your domestic power supply is

earthed and complies with the effective safety re-

quirements. The installation of the appliance must

be carried out by a qualified technician. Observe the

provisions of the local electricity supply company

and the general laws. In rare cases, a missing pro-

ductive conductor or incorrect installation may lead

to material damage or serious injuries, such as

death or injury caused by electric shock. The manu-

facturer accepts no responsibility for personal injur-

ies or damage to the appliance due to faulty or in-

correct electrical connection.

¡ The appliance must always be disconnected from

the power supply when installation work is being

carried out.

¡ The appliance fulfils the requirements of protection

class I and must only be connected to an earthed

mains socket.

¡ The H05 V V-F 3G mains connection cable must be

at least 1.5 mm². The yellow-green conductor must

be connected first and be slightly longer than the

two other wires on the appliance side.

¡ In accordance with safety regulations, an all-pole

separator with at least a 3 mm contact opening

must be provided. A separator is not required dur-

ing connection, which is carried out via an earthed

power socket that is easily accessible at all times.

¡ Contact protection must be guaranteed during in-

stallation.

¡ Determine the phase conductor and neutral con-

ductor (zero conductor) in the socket. The appliance

may be damaged if it is not connected correctly.

¡ Connect the oven in accordance with the specifica-

tions on the rating plate.

¡ Place the appliance in front of the surround unit to

connect it. The connection cable must be long

enough. Caution: During the installation, ensure that

the power cord is not jammed and does not come

into contact with hot appliance parts.

¡ All work on the appliance, including replacing the

cabling, must only be carried out by the after-sales

service.

19.7 Important information about the

electrical connection

Note the following information and ensure that:

WARNING ‒ Risk of electric shock!

There is a risk of electric shock if you touch live com-

ponents.

Hold the mains plug with dry hands only.

▶

Never pull out the mains plug from the socket while

▶

the appliance is in operation.

Pull out the power cable directly at the plug and

▶

never by pulling the power cable as this may be-

come damaged.

¡ Fit the mains plug and socket together.

¡ The mains plug can be accessed at all times.

¡ The cross section of the cable is sufficient.

¡ The mains cable is not kinked, crushed, modified or

severed.