Bosch 2 Manual de consulta rápida

Imprimir página

Before using for the first time, read the instruction manual and the safety information it contains.

Short and handy...

... everything your dishwasher needs.

How to use your appliance

Load the tableware.

Only clean tableware that is suitable for dish-

washers. Remove large remnants of food from

the tableware. Check that the spray arms can ro-

Overview of water hardness settings

You can find an overview of the water hardness values that can be

selected here.

A table of country-specific units can be found in the instruction

manual.

Hardness

mmol/l

Level

range

Soft

0 - 1.1

Medium

1.2 - 2.9

Hard

3.0 - 3.7

Hard

3.8 - 6.2

Adding special salt

To avoid damage to the appliance, only add special

salt to the dispenser for special salt just before the

programme starts.

Unscrew the lid of the dispenser for special salt

and remove.

On initial start-up: Fill the dispenser right up with

water.

Adding rinse aid

Press the catch on the lid

of the dispenser for rinse

aid

and lift

⁠ .

Adding detergent

Add the detergent to the

dry detergent dispenser.

tate freely.

Add detergent.

Switch on the appliance

⁠ .

Setting the water softening sys-

tem

Press

To open the appliance settings,

press

is flashing on the display.

LED A

LED B

LED C

Press

water hardness has been set.

0, 1, 2 or 3 LEDs will light up ac-

cordingly.

To save the settings, press

Add the special salt to the

dispenser. The water in the

dispenser is displaced and

forced out. Never add de-

tergent.

Place the lid back on the dispenser and turn to

close.

Add rinse aid up to the

max mark.

Close the lid of the dispenser for rinse aid.

a The lid clicks into position.

Close the lid of the deter-

50 ml

gent dispenser.

25 ml

15 ml

a The lid clicks into position.

Select the programme.

Start the programme

⁠ .

Remove the tableware at the end of the pro-

gramme.

Programmes

The programme data has been meas-

ured in the laboratory according to

⁠ .

European standard EN 60436.

The consumption figures depend on

for 3 seconds.

the programme and additional func-

tion selected.

repeatedly until the right

The runtime will change if the rinse

aid system is switched off or rinse aid

needs to be added.

Programme

for 3 seconds.

Intensive 70°

Auto 45-65°

Eco 50°

Express 65° - 1h

Machine Care

max

To cancel the programme, press

approx. 4 seconds.

The programme is cancelled and ends after ap-

prox. 1 minute.

1) Duration [h:min]

2) Energy [kWh]

3) Water [l]

1) 2:10 - 2:15

2) 1,300 - 1,350

3) 11,0 - 13,5

1) 1:45 - 2:45

2) 0,850 - 1,350

3) 9,5 - 15,5

1) 4:30

2) 0,923

3) 10,5

1) 1:00

2) 1,100

3) 10,0

1) 2:10

2) 1,450

3) 15,0

for