Electrolux WHL6036CN Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Campana de ventilación Electrolux WHL6036CN. Electrolux WHL6036CN 28 páginas.

www.electrolux.com

4. CONTROLS

The hood can be switched on pushing directly onto the requested speed without firstly having

to select 0/1 button.

Button

• For replacement contact techni-

cal support ("To purchase contact

technical support").

Led

Function

Turns the lights on/off at maximum strength.

Fixed

Turns the motor on/off at speed one.

Fixed

Turns the Motor on at speed two.

Press and hold the button for approximately 3 seconds, with all the

loads turned off (Motor and Lights), to turn the Activated Charcoal Filter

alarm on. The relevant LED flashes twice to confirm.To turn the alarm

off, press the button again and hold for at least 3 seconds. The relevant

LED flashes once.

Fixed

Turns the Motor on at speed three.

Press and hold the button for approximately 3 seconds, with all the lo-

ads turned off (Motor and Lights), to perform a reset of Filter saturation

alarm. The LED S1 flashes three times.

Fixed

Turns the Motor on at INTENSIVE Speed.This speed is timed to run for

6 minutes. At the end of this time, the system returns automatically to

the speed that was set before. If it is activated with the motor turned off,

the hood will switch to OFF at the end of the time.

Press and hold for 3 seconds to enable the remote control, indicated

by the LED flashing twice.Press and hold for 3 seconds to disable the

remote control, indicated by the LED flashing just once.

Fixed

Signals the Metal Grease Filter saturation alarm, indicating that it is

necessary to wash the filters. The alarm is triggered after the Hood has

been in operation for 100 working hours.

Flashing

When this is activated, it signals the Activated Charcoal Filter satura-

tion alarm, indicating that the filter must be changed; the Metal Grease

Filters must also be washed. The Activated Charcoal Filter saturation

alarm comes into operation after the Hood has been working for 200

hours.