Bosch 6 Series Manual de instrucciones de instalación y uso - Página 6

Imprimir página

Bosch 6 Series Manual de instrucciones de instalación y uso

Operating the appliance

1Operating the appliance

T hese instructions apply to several appliance variants.

O p e r a t i n g t h e a p p l i a n c e

It is possible that individual features are described

which do not apply to your appliance.

Control panel model 1

Symbol

Explanation

Fan on/off

1-3

Fan settings

Intensive mode 1

Intensive mode 2

Fan run-on

Metal grease filter/activated charcoal filter saturation

indicator

Light on/off/dimming

Setting the fan

Switching on

Touch the

symbol.

The fan starts at fan setting 2.

Selecting the fan setting

Touch symbol 1, 2 or 3 to set a different fan setting.

Switching off

Touch the

symbol.

Intensive setting

You can use the intensive setting if there is a large

build-up of odours and fumes/vapours.

Switching on

Touch the

After approx. 6 minutes, the extractor hood

Note:

automatically switches back to fan setting 3.

Switching off

If you want to end intensive mode before the preset

time expires, touch the symbol for the required fan

setting.

symbol.

Switch on the extractor hood when you start

Note:

cooking and switch it off again several minutes after you

have finished cooking. This is the most effective way of

removing the kitchen fumes.

Intermediate position for the glass front

On some appliances, the glass front can be adjusted to

an intermediate position. The intermediate position can

be used for eliminating particularly strong cooking

smells and large amounts of steam.

Take hold of the glass front in the centre and open it

carefully.

Fan run-on time

Switching on

Touch the

symbol.

The fan will run at fan setting 1.

After approximately 10 minutes, the fan will switch itself

off automatically.

Switching off

Touch the

symbol.

This immediately stops fan run-on.

Lighting

The lighting can be switched on and off independently

of the fan.

Touch the

symbol.

Setting the brightness

Press and hold the

symbol until the required

brightness is reached.