Bosch 6 Series Manual del usuario - Página 12

Imprimir página

en Installation and connection

Prepare the appliance for first use.

→ Page 12

Electrically connect the appliance.

→ Page 13

Criteria for the installation loca-

tion

Follow these instructions when in-

stalling your appliance.

WARNING

Risk of explosion!

If the appliance is in a space that is

too small, a leak in the refrigeration

circuit may result in a flammable mix-

ture of gas and air.

Only install the appliance in a

▶

space with a volume of at least

1 m

per 8 g refrigerant. The

volume of refrigerant is indicated

on the rating plate. → "Appliance",

Fig.

, Page 15

The weight of the appliance ex works

may be up to 75 kg depending on

the model.

The subfloor must be of sufficient sta-

bility to bear the weight of the appli-

ance.

Permitted room temperature

The permitted room temperature de-

pends on the appliance's climate

class.

The climate class can be found on

the rating plate. → "Appliance", Fig.

, Page 15

Climate class Permitted room temperat-

ure

10 °C to 32 °C

16 °C to 32 °C

16 °C to 38 °C

16 °C to 43 °C

The appliance is fully functional within

the permitted room temperature.

If an appliance with climate class SN

is operated at colder room temperat-

ures, the appliance will not be dam-

aged up to a room temperature of

5 °C.

Niche dimensions

Observe the niche dimensions if you

install your appliance in the furniture

recess. If this is not the case, prob-

lems may occur when installing the

appliance.

Niche depth

Install the appliance in the recom-

mended niche depth of 560 mm.

If the niche depth is smaller, the en-

ergy consumption increases slightly.

The niche depth must be a minimum

550 mm.

Niche width

An inside niche width of at least

560 mm is required for the appli-

ance.

Side-by-side installation

If you want to install two appliances

side by side, you must maintain a

distance of at least 150 mm between

the appliances.

Preparing the appliance for the

first time

Remove the informative material.

Remove the protective foil and

transit bolts, e.g. remove the ad-

hesive strips and carton.

Clean the appliance for the first

time. → Page 25