Bosch 8 Series Manual de instrucciones de instalación y uso - Página 4

Imprimir página

Bosch 8 Series Manual de instrucciones de instalación y uso

Environmental protection

Causes of damage

Caution!

Risk of damage due to corrosion. Always

switch on the appliance while cooking to avoid

condensation. Condensate can produce

corrosion damage.

Always replace faulty bulbs to prevent the

remaining bulbs from overloading.

Risk of damage due to ingress of humidity into

the electronic circuitry. Never clean operator

controls with a wet cloth.

Surface damage due to incorrect cleaning.

Clean stainless steel surfaces in the direction

of the grain only. Do not use any stainless

steel cleaners for operator controls.

Surface damage due to strong or abrasive

cleaning agents. Never use strong and

abrasive cleaning agents.

Risk of damage as a result of incorrect

loading of design elements. Do not pull design

elements.Do not place objects on the design

elements or hang objects from them.

7Environmental protection

Y our new appliance is particularly energy-efficient.

E n v i r o n m e n t a l p r o t e c t i o n

Here you can find tips on how to save even more

energy when using the appliance, and how to dispose

of your appliance properly.

Saving energy

During cooking, ensure that there is a sufficient

■

supply of air so that the extractor hood can work

efficiently and with a low level of operating noise.

Adjust the fan speed to the intensity of the cooking

■

fumes. Only use intensive mode where this is

required. A lower fan speed means that less energy

is consumed.

If there are intensive cooking fumes, select a higher

■

fan speed in good time. If cooking fumes have

already spread in the kitchen, the extractor hood

must be operated for longer.

Switch off the extractor hood if you no longer require

■

it.

Switch off the lighting if you no longer require it.

■

Clean and, if required, replace the filter at regular

■

intervals in order to increase the effectiveness of the

ventilation system and to prevent the risk of fire.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly

manner.

This appliance is labelled in accordance with

European Directive 2012/19/EU concerning

used electrical and electronic appliances

(waste electrical and electronic equipment -

WEEE). The guideline determines the

framework for the return and recycling of used

appliances as applicable throughout the EU.