Electrolux # Manual de uso y mantenimiento - Página 25

Care

Cleanin

STARTING THE OVENSELF-CLEANCYCLE

[]

If you are planning to use the oven directly after a self-clean cycle remember to allow time

for the oven to cool down and the oven door to unlock. This normally takes about one hour.

So to self-clean for 3 hours will actually take about 4 hours to complete.

To start

a Self=Cleaning

cycle:

Be sure oven is empty and the oven door is closed.

Turn the selector knob to Clean position.

The corresponding indicator light will flash.

Turn the Temperature Control Knob to Clean position.

The Lock indicator light will flash while changing from unlock to lock. It will stop flashing

when the door is locked.

As soon as the controls are set to clean, the motor driven oven door lock will begin to

close automatically. Once the door has been locked the indicator light will stop flashing

and remain on. Allow about 30 seconds for the oven door lock to close.