Electrolux # Manual de uso y mantenimiento - Página 7

Imprimir página

Electrolux # Manual de uso y mantenimiento

GROUNDING INSTRUCTIONS

For personal safety, the cooktop must be properly grounded. For

maximum safety, the power cord must be plugged into an

electrical outlet that is correctly polarized and properly grounded.

DO NOT operate the cooktop using a 2-prong adapter or an

extension cord. If a 2-prong wall receptacle is the only available

outlet, it is the personal responsibility of the consumer to have it

replaced with a properly grounded 3-prong wall receptacle

installed by a qualified electrician.

See the INSTALLATION INSTRUCTIONS packaged with this

cooktop for complete installation and grounding instructions.

WARNING

This appliance is equipped with a 3-prong grounding plug for your protection

against shock hazard and should be plugged directly into a properly

grounded receptacle. DO NOT cut or remove the grounding prong from this

plug.

Avoid fire hazard or electrical shock. DO NOT use an adapter plug, an

extension cord, or remove grounding prong from electrical power cord.

LIQUEFIED PETROLEUM (PROPANE) GAS CONVERSION

This appliance can be used with Natural Gas and Propane Gas. It is shipped from the

factory for use with natural gas.

A kit for converting to LP gas is supplied with your cooktop. The kit is marked "FOR LP/

PROPANE GAS CONVERSION". Follow the installation instructions which are inside the

envelope.

The conversion must be performed by a qualified service technician in accordance with

the kit instructions and all local codes and requirements. Failure to follow instructions

could result in serious injury or property damage. The qualified agency performing this

work assumes responsibility for the conversion.

WARNING

Severe shock, or damage to the cooktop may occur if the cooktop is not installed by a qualified installer or

UTION

CAUTION

UTION

Any additions, changes or conversions required in order for this appliance to satisfactorily meet the

application needs must be made by a qualified service technician in accordance with the manufacturer's

instructions and all codes and requirements of the authority having jurisdiction. Failure to follow the

instructions could result in serious injury or property damage. The qualified agency performing this work

assumes responsibility for the conversion.

Getting St t art

Getting S

art

Grounding

type wall

receptacle

Power supply cord with

3-prong grounding plug

Do not, under any

circumstances, cut,

remove, or bypass the

grounding prong.