Atlas ROCKFA62T-BR Instrucciones de instalación
Navegue en línea o descargue pdf Instrucciones de instalación para Sistema de altavoces Atlas ROCKFA62T-BR. Atlas ROCKFA62T-BR 1 páginas. 6" strategy series rock landscape speaker system
También para Atlas ROCKFA62T-BR: Especificaciones (3 páginas)
Imprimir página
ROCKFA62T-BR WeATheR ResisTAnT
2-WAy OuTdOOR LOudspeAKeR sysTem
Thank you for choosing Atlas Sound for your Commercial Sound System needs. The ROCKFA62T-BR outdoor loudspeaker
is engineered to provide years of trouble free operation and enjoyment. Please read the following installation instructions
BEFORE connecting to your audio system.
Atlas Sound's ROCKFA62T-BR brings Strategy series sound quality to the great outdoors by packaging the proven performance
of model FA136 driver in a specially designed, natural looking, simulated stone enclosure. An internal 32 watt 70.7V/100V
transformer is terminated to a 24" direct burial rated pigtail that includes conductors for all transformer taps as well as a
direct connection for 8 Ω operation. The side firing transducer allows the installer to aim sound at targeted listening areas. 30'
spacing between loudspeakers will give good uniform coverage for most applications. For higher noise environments or where
stereo imaging is desired closer spacing and/or additional devices may be required. Please contact Atlas Sound for design
recommendations.
WiRinG insTRuCTiOns
The ROCKFA62T-BR allows for both direct coupled (8 Ω) operation and 70.7V, depending on which wires are selected for
speaker line termination.
8 Ω WiRinG
Connect the BLACK wire on the ROCKFA62T-BR to the negative or common on your amplifier, and the RED to the positive.
If your amplifier will support speaker loads down to 4 Ω, you can connect two (2) ROCKFA62T-BR's in parallel, per channel.
Consult the owners manual of your amplifier to verify this.
Use 2 conductor stranded wire of sufficient capacity to avoid voltage drops due to long lengths.
70.7V WiRinG
Connect the BLACK wire on the ROCKFA62T-BR to the negative or common on your commercial amplifier. Choose the
appropriate color for the 70.7V tap per the instructions below.
Use 2 conductor stranded wire of sufficient capacity to avoid voltage drops due to long lengths.
BLACK – COMMON
RED – 8 Ω (DO NOT USE FOR 70.7V OPERATION)
YELLOW – 32 watt TAP
GREEN – 16 watt TAP
BLUE – 8 watt TAP
ORANGE – 4 watt TAP
While the ROCKFA62T-BR is weather resistant, care should be taken during installation to avoid placing this loudspeaker near
lawn sprinklers, or locations that could flood the loudspeaker enclosure.
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •
©2008 ATLAS SOUND LP
Specifications are subject to change without notice
AtlasSound.com
Printed in U.S.A.
INSTALLATION INSTRUCTIONS
TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
ATS003082 RevA 3/08
1