Atlas Copco 8433302395 Instrucciones del producto - Página 9
Navegue en línea o descargue pdf Instrucciones del producto para Herramienta eléctrica Atlas Copco 8433302395. Atlas Copco 8433302395 16 páginas. Battery-powered nutrunner
Imprimir página
ETP STB34-12-I06
Service
Preventing ESD Problems
The components inside the product and controller are sensitive to electrostatic discharge. To avoid future
malfunction, make sure that service and maintenance is carried out in an ESD approved work environ-
ment. The figure below shows an example of an appropriate service work station.
Maintenance Instructions
Service Recommendations
Preventive maintenance is recommended at regular intervals. See the detailed information on preventive
maintenance. If the product is not working properly, take it out of service and inspect it.
If no detailed information about preventive maintenance is included, follow these general guide-
lines:
■
Clean appropriate parts accurately
■
Replace any defective or worn parts
Preventive Maintenance
Maximize Battery Life
In order to maximize battery life, do not leave the battery connected to the tool you do not use it for sev-
eral days. The battery can discharge and go into "sleep mode" which will require a special wake-up charge
procedure. For further information, see instructions for multicharger, 4211542485.
Lubrication Instructions
Lubricating Guide
Brand
Molycote
CRC
Brand
Molycote
Almagard
EN
Cable nut
Litium grease No. 3020
Angle gears
Longterm 2 plus
© Atlas Copco Industrial Technique AB - 9839 1892 01
Gears
BR2 Plus
General purpose
LE 3751
Service
9