Atlas Copco AME 1600 Manual de instrucciones de seguridad y funcionamiento - Página 6
Navegue en línea o descargue pdf Manual de instrucciones de seguridad y funcionamiento para Herramienta eléctrica Atlas Copco AME 1600. Atlas Copco AME 1600 20 páginas. Poker vibrator
Imprimir página
Safety and operating instructions
Safety instructions
To reduce the risk of serious injury or death
to yourself or others, read and understand the
Safety and operating instruction before installing,
operating, repairing, maintaining, or changing
accessories on the machine.
Post this Safety and operating instruction at work
locations, provide copies to employees, and make
sure that everyone reads the Safety and operating
instruction before operating or servicing the
machine.
In addition, the operator or the operator's employer
must assess the specifi c risks that may be present
as a result of each use of the machine.
Save all warnings and instructions for future
reference.
Safety signal words
The signal words Danger, Warning, Caution, and
Notice are used as follows in these Safety and
operating instructions:
DANGER
indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
Work area
DANGER
Explosion hazard
If a warm machine comes into contact with
explosives, an explosion could occur. During
operating with certain materials, sparks and
ignition can occur. Explosions will lead to severe
injuries or death.
►
Never operate the machine in any explosive
environment.
►
Never use the machine near fl ammable
materials, fumes or dust.
►
Make sure that there are no undetected sources
of gas or explosives.
WARNING
Secure the working area
Cluttered benches and insuffi cient lighting can
cause personal accidents and result in serious
injuries.
►
Keep the working area clean.
6
►
Maintain adequate lighting in the working area.
Only qualifi ed and trained persons may operate
or maintain the machine. They must be physically
able to handle the bulk, weight, and power of the
machine. Always use your common sense and
good judgement.
Keep bystanders, children, and visitors away while
operating the machine. Distractions may cause
loss of control.
Electrical safety
DANGER
Electrical hazard
There is a risk of electrical shocks from electrically
powered machines which can lead to serious
injuries or death.
►
Avoid body contact with earthed (grounded)
surfaces.
►
Make sure that there are no concealed wires or
other sources of electricity in the working area.
►
Always check that the mains voltage
corresponds with that stated on the data plate
on the machine.
WARNING
Electrical safety
There is a risk of electrical shock if the electrical
cable is not treated correctly, if the machine is
damaged or modifi ed. This can lead to serious
injuries or death.
►
The electrical plug on the machine must match
the socket.
►
Never modify the electrical plug to match the
socket.
►
Do not use adapter plugs with earthed
(grounded) machines. Unmodifi ed plugs
and matching sockets will reduce the risk of
electrical shock.
►
Never move the machine by dragging the
electrical cable.
►
Disconnect the cable only by pulling the plug,
never pull the electrical cable.
►
Make sure the electrical cable is not pinched in
doors, fences or similar.
►
Check that the electrical cable and cable plug
are intact and in good condition.
►
Never connect a damaged electrical cable to
the machine.
►
Never touch the electrical cable if it becomes
damaged during the work. Disconnect the
electrical cable plug from the socket.
© 2015 Construction tools PC AB | No. 9800 1713 01 | 2015-04-07
AME 1600
Original instructions