Atlas Copco ETD MT41-100-I06 Instrucciones del producto - Página 4
Navegue en línea o descargue pdf Instrucciones del producto para Herramienta eléctrica Atlas Copco ETD MT41-100-I06. Atlas Copco ETD MT41-100-I06 16 páginas. Handheld transducerized
Imprimir página
Product Information
ServAid
ServAid is a portal that is continuously updated and contains Technical Information, such as:
■
Regulatory and Safety Information
■
Technical Data
■
Installation, Operation and Service Instructions
■
Spare Parts Lists
■
Accessories
■
Dimensional Drawings
Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local Atlas Copco representative.
Safety Data Sheets MSDS/SDS
The Safety Data Sheets describe the chemical products sold by Atlas Copco.
Please consult the Atlas Copco website for more information www.atlascopco.com/sds.
Country of Origin
For the Country of Origin, please refer to the information on the product label.
Dimensional Drawings
Dimensional Drawings can be found either in the Dimensional Drawings Archive, or on ServAid.
Please visit:
http://webbox.atlascopco.com/webbox/dimdrw
Overview
Technical Product Data
Technical Product Data can be found on either ServAid, or the Atlas Copco website.
Please visit:
https://servaid.atlascopco.com
Bit run out test
Bit run out is measured with the tool securely fastened in a test rig and with the tool running at no load
with a rotation speed of 200 rpm. Measuring point is at 44 mm (length of a standard bit) out on a special
bit 4216 2194 00. Bit run out limit is 0.15 mm.
4
EN
or www.atlascopco.com.
© Atlas Copco Industrial Technique AB - 9839 1064 01
or https://servaid.atlascopco.com.
ETD MT41-100-I06