Alert 750R Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Arranque a distancia Alert 750R. Alert 750R 15 páginas. Remote engine starter with alarm system

Imprimir página

R. DRIVER PAGING

It is useful the event that someone wants to page the driver of the parked vehicle.

Under the ignition switch "off" condition, press and hold the valet switch for 2 seconds to

page the driver, one chirp sound shall be emitted from the vehicle and the paging melody

sound continues sounding from you Remote LCD transceiver and "

on the LCD screen.

S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION

The alarm with a unique feature which will turn on your vehicle dome light as following:

1. Upon disarming, the interior light will remain on for 30 seconds.

2. If the vehicle is intruded, the interior light will flash for the same duration as the siren.

Note: Turn on the ignition switch or arm the alarm will turn off the dome light.

T. IGNITION CONTROL DOOR LOCK/UNLOCK.

If the vehicles door locks have been interfaced to the security system, the system will automatically lock

the vehicle's doors when the ignition is turned "ON" and /or unlock the vehicle's doors when the ignition is

turned "OFF".

U. CHANNEL 3 (TRUNK RELEASE) OUTPUT.

Press and hold

release or other electric devices.

V. CHANNEL 4 TIMER CONTROL OUTPUT

Press the transmitter

function. Channel 4 is user-programmable timer output. You may program the built-in

timer to send a ground signal for any time duration from 1 second to 120 seconds. For

instance, this timer output may be used to turn on the headlight, power window or sunroof.

(Factory defaults setting at momentary output.)

W. CHANNEL 5 TIMER CONTROL OUTPUT

Press the transmitter

function. Channel 5 is user-programmable timer output. You may program the built-in

timer to send a ground signal for any time duration from 1 second to 120 seconds. For

instance, this timer output may be used to turn on the headlight, power window or sunroof.

(Factory defaults setting at momentary output.)

X. CHANNEL 6 TIMER CONTROL OUTPUT

Press the transmitter

function. Channel 6 is user-programmable timer output. You may program the built-in

timer to send a ground signal for any time duration from 1 second to 120 seconds. For

instance, this timer output may be used to turn on the headlight, power window or sunroof.

(Factory defaults setting at momentary output.)

Y. POWER ON MEMONRY:

This security system is equipped with circuitry that will allow the unit to remember its alarm state if the

power is lost and then reconnected.

A. TO REMOTE START THE VEHICLE:

When you want to start your vehicle,

1. Press

button twice on the transmitter

2. The parking light will activate to indicate the remote start received the signal. (A

750R OP

(For two-way transceiver operation only)

button on the transmitter for two seconds to remote control the trunk

(4)

and

buttons at the same time to active Channel 4

(5)

and

buttons at the same time to active Channel 5

(6)

and

REMOTE START OPERATION

buttons at the same time to active Channel 6

MAY/03/2004

" indication flashes

Activate

Remote Start