Bose 701 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Altavoces Bose 701. Bose 701 12 páginas. Direct/reflecting series ii speakers
También para Bose 701: Manual del usuario (20 páginas)

Imprimir página

Left

Speaker

–

Check the connections

Make sure that no loose strands of wire touch across terminals. Bridged wires can short

circuit and damage the speakers or components. Tighten any loose connections before

you plug in the receiver or amplifier and turn it on.

Test the connections

To make sure your speakers operate correctly:

1. Set your receiver or amplifier for MONO (monophonic) and turn it on.

2. Set the balance control to normal (center position).

3. Place the speakers less than 6 inches (15 cm) apart, facing each other.

4. Play some deep bass passages of music through the speakers.

The sound should seem to come from a point between the two speakers. The bass should

be full and natural. If it is not, your connections may be out of phase. To correct the

problem, reverse the connections on the back of one speaker. Then repeat steps 1 - 4.

AM172642_03_V.pdf

–

Stereo

Amplifier

or Receiver

– +

–

Right

Left

Output

Right

Speaker

—

BLACK

RED

INPUT

December 20, 2001

Connections

Figure 3

To complete the speaker connec-

tions.