Bose Acoustimass 10 Series I Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Altavoces Bose Acoustimass 10 Series I. Bose Acoustimass 10 Series I 17 páginas. Series 2
También para Bose Acoustimass 10 Series I: Manual del usuario (18 páginas), Manual del usuario (25 páginas), Manual (17 páginas)
Imprimir página
SeftingUp
Connect the Acoustimass® module to the surround cube
speakers
Use the 50 foot (15 m) cable with two pairs of wires to connect the Right and Left surround
cube speakers to the Acoustimass module.
1. Use the wire marked RIGHT SURROUND to connect the module to the right surround
speaker (on your right as you face the TV). As shown in Figure 8, press the terminal tab on
the back of the speaker to insert the marked wire into the red terminal and the plain wire
into the black terminal. Release the tab to secure the wires in place.
2. The wire marked LEFT SURROUND connects the module to the left surround speaker.
Press the terminal tab on the back of the speaker to insert the marked wire into the red
terminal and the plain wire into the black terminal. Release the tab to secure the wires.
Connect the Acoustimass module to the receiver
Use the 20 foot (6 m) cable with five pairs of wires to connect the Acoustimass module to
your surround-sound receiver.
1. Match the wire labels to the SPEAKER OUTPUT labels on the receiver:
a. RIGHT wires go to the Right Front SPEAKER OUTPUT connections.
b. CENTER wires go to the Center SPEAKER OUTPUT connections.
c. LEFT wires go to the Left Front SPEAKER OUTPUT connections.
d. RIGHT SURROUND wires to the Right Surround (rear) SPEAKER OUTPUT connec-
tions.
e. LEFT SURROUND wires go to the Left Surround (rear) SPEAKER OUTPUT connec-
tions.
2. Match the polarity on the receiver. Connect the wire pairs in phase
(+
to + and - to -).
a. Attach each marked wire (+) to the appropriate positive (+) terminal.
b. Attach each plain wire (-) to the appropriate negative (-) terminal.
3. At the Acoustimass module, check to make sure all RCA connectors are firmly inserted
into the proper INPUT FROM RECEIVER OR AMPLIFIER jacks.
J
Note:
"Front" speakers may also be called "Main", ':.4", or "1" by some receiver manufacturers.
"Surround" speakers may be called "Rear",
A
CAUTION: 00
not connect the Acoustimass module directly to yoU! Television unless the
television provides surround decoding circuitry and amplified outputs for all channels.
11