Atlas Copco PN 3500 Instrucciones de reparación - Página 8

Navegue en línea o descargue pdf Instrucciones de reparación para Taladro Atlas Copco PN 3500. Atlas Copco PN 3500 18 páginas.

Removing the

Loosen the screws (1) and (4) and pull out

motor

the motor (3).

If necessary, hit the motor housing (2)

lightly with a plastic hammer for support.

Removing and

Remove the seal ring (8).

dismantling the

Lever off the angle (1) and remove the sil-

armature

icone buffer (2).

Pull out the complete armature (7).

Press off the toothed wheel (3).

Remove the washer (4) and the seal

ring (5).

Apply the pulling-off device below the

ball bearing (6) and press off the ball bear-

ing (6).

Removing the

Remove the air deflector plate (1) and

field

damaged silicone buffers (2).

Pull the field (4) from the motor hous-

ing (5) and remove the centring

ledges (3). If necessary, hit the motor

housing lightly with a plastic hammer

for support.

Repair Instructions No.179.11/97

PN 3500 / PN 3500 X

PAGE