Bose 161 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Bose 161. Bose 161 19 páginas. Bose 161 speakers owner's guide
También para Bose 161: Manual del usuario (12 páginas), (Inglés) Manual de instrucciones (8 páginas), (alemán) Instrucciones de uso (8 páginas), (Holandés) Instrucciones de uso (8 páginas)

Setup

Figure 1

Locations for

attaching rubber

feet to the bottom

of the speakers

Unpack the carton carefully. Save the carton and packing materi-

als for possible later use. If either speaker appears damaged, do

not operate either one. Repack both speakers in the original car-

ton and notify your authorized Bose

™

Note: Your 161 speakers are magnetically shielded to prevent

interference with most television screens.

For best acoustic performance, place the left channel speaker on

the left side of the room and the right channel speaker on the

right, at least 5 feet (1.5 m) apart. (Refer to the label on the back of

each speaker.) Make sure the back of each speaker is parallel to

the front wall.

For rear channel use in a home theater surround sound system,

put the speakers near the back of the room, behind or to the sides

of the listening area.

Attach the supplied self-adhesive feet to the bottom surface of

each speaker for greater stability (Figure 1).

If you want to mount your speakers using the supplied wall

brackets, see "Mounting your speakers on a wall" on page 6.

CAUTION: Do not install near any heat sources, such as radiators,

heat registers, stoves, or other apparatus (including amplifiers) that

produce heat.

Be sure to use the proper gauge (thickness) of speaker cord.

Standard zip cord (2-conductor, 18-gauge [0.75 mm

at electrical and hardware stores) works for most applications. If

the length of speaker wire extends more than 30 feet (9 m) from a

receiver or amplifier, refer to "Wire recommendations" on page 7

or contact your authorized Bose dealer for more information.

CAUTION: Before making any connections, turn off your receiver

or amplifier and unplug it from the outlet (the AC power mains).

dealer immediately.

] wire found