Bose Acoustimass 16 Series II Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Bose Acoustimass 16 Series II. Bose Acoustimass 16 Series II 33 páginas. Home entertainment speaker system
También para Bose Acoustimass 16 Series II: Manual del usuario (44 páginas), Manual de configuración rápida (1 páginas), Manual del usuario (24 páginas)

Imprimir página

Bose Acoustimass 16 Series II Manual del usuario

SING YOUR SYSTEM

Setting your digital surround sound receiver

Figure 10

Digital signal receiver

connections

Setting your analog surround sound receiver

Speakers in your Bose

Acoustimass

fully compatible with the audio output of digital surround receivers. The system's integrated

signal processing supports full low-frequency reproduction from all channels.

To gain complete advantage of these system capabilities, you may want to adjust some!

settings on your receiver. To make changes, use the digital display menu on the receiver and

refer to the list of recommended settings, below.

Speaker

• Left and right

• Center

• Left and right surround

• Center surround*

• LFE/Subwoofer

* With an Acoustimass 16 Series II system or upgraded Acoustimass 15 Series IlI system only.

Note: If your receiver provides it, the LFE or Subwoofer option setting should be ON and the

crossover value at the lowest number possible, which is typically 80 Hz.

Receiving a digital audio signal

For the digital audio signal from your DVD player to reach your surround receiver, you need a

digital audio connection between the DVD player and receiver (Figure 10).

1. Use either the Optical or Coaxial input (not both) on the receiver to connect to the digital

output from the DVD.

2. Be sure to select the digital output in the setup menu of your DVD player.

For additional setup and operating information, please refer to the owner's guide that came

with your surround receiver.

Use one or the other,

NOT both

For analog (non-digital) surround sound applications, we recommend that you set the !

surround sound center mode of your receiver to Wide. For instructions on how to change this

setting, refer to the owner's guide provided with your surround receiver.

Français

16 Series II or Acoustimass 15 Series III system are

Receiver setting

LARGE

Español

English