ABSCO SHEDS CPDW50 Manual de montaje e instrucciones - Página 15
Navegue en línea o descargue pdf Manual de montaje e instrucciones para Tienda ABSCO SHEDS CPDW50. ABSCO SHEDS CPDW50 19 páginas. Skillion carport
Imprimir páginaDP-5
DP-2
DP-3
DP-1
DP-4
CUT A ROUND HOLE 51mm IN DIAMETER IN ONE END OF THE REAR EDGE BEAM. THIS CAN BE
DONE BY DRILLING A SERIES OF 3mm HOLES AND THEN PUNCHING OUT THAT SECTION. FIT THE
GALVANISED GUTTER DROP AND SEAL WITH SILICONE. FASTEN THE DOWNPIPES AND BENDS
AS SHOWN. BEND THE 270 x 25 FLAT STRIPS (DS) TO SHAPE AND FASTEN THE DOWNPIPE TO
THE COLUMNS.
IMMEDIATE MAINTENANCE:
CLEAN DOWN ALL ROOF AND EDGE/CROSS BEAM INTERNAL AREAS. METAL FILINGS FROM
DRILLING HOLES AND USING SELF DRILLING SCREWS CAN CAUSE DISCOLORATION AND
CORROSION TO ROOF SHEETS AND GALVANIZED FRAMING SECTIONS.
ABSCO INDUSTRIES
Skillion Carport Model: CPDW50
DS
ASSEMBLY INSTRUCTION MANUAL
Absco Industries
STEP 10
BEND THE ENDS OF 16 FLAT STRIPS
(270mm X 25mm) AS SHOWN AND
SECURE AT MAXIMUM 1500mm
CENTRES WITH ONE SCREW
CARPORT MODEL: CPDW50
AT EACH END.
RB
10-05-2017
PAGE 15