Bose PANARAY LT II Series Manual de servicio - Página 12

Navegue en línea o descargue pdf Manual de servicio para Sistema de altavoces Bose PANARAY LT II Series. Bose PANARAY LT II Series 18 páginas.

DISASSEMBLY/ASSEMBLY PROCEDURES

Note: The 3202 II loudspeaker has two Vee

Four driver assemblies. The cover does not

need to be removed to access the lower

driver assembly.

5. Vee Four Lower Driver Removal

5.1 Disconnect the two wires connected to

the terminals on the driver assembly.

5.2 Remove the four screws holding the

driver assembly to the cabinet.

5.3 Remove the driver assembly.

6. Vee Four Lower Driver Replacement

6.1 Place the new Vee Four driver assem-

bly onto the cabinet.

6.2 Secure driver assembly to the cabinet

using the screws provided in the new driver

assembly packaging.

6.3 Perform the test procedures on page

13.

7. Crossover Component Removal

7.1 Perform steps 1.1 and 1.2.

7.2 To remove the capacitors remove the

screws from the bracket (12) and discon-

nect the wires.

7.3 To remove the inductor assembly (13)

remove the screw (19) from the center of

the inductor. Disconnect the inductor from

the capacitor and the wire harness and

remove the inductor.

8. Crossover Component Replacement

8.1 Reconnect the wires to the new ca-

pacitor and place it into the cabinet. Place

the bracket (12) over the capacitor and

secure it to the cabinet.

3202™/4402™/9702™ SERIES II

8.3 Place the new inductor assembly (13)

into the cabinet and secure it to the cabinet.

Connect the wires to the capacitor and wire

harness.

8.4 Perform the test procedures on page

13.

8.5 Perform step and 2.5.