3M SH-EXP Manual de instalación - Página 5

Navegue en línea o descargue pdf Manual de instalación para Sistemas de filtración de agua 3M SH-EXP. 3M SH-EXP 8 páginas. Add on expansion head model for use on twin (2xx), triple (3xx), scale feeder (sf1xx), dual flow (df1xx, df2xx) and dual port (dp1xx, dp2xx, dp3xx)

Imprimir página

STEP 4

Existing Manifold

After removing retention clips, remove front and rear fittings by rotating

while pulling out and towards the right. Insert same front and rear fittings

directly into the same port of the SH-EXP expansion head. Complete by

installing front and rear retention clips. (Refer to photo).

STEP 5

Remove the double ended connectors (2) from SH-EXP expansion head

fitting kit. Lubricate with water and rotate while inserting into left side port

of the SH-EXP expansion head. Install retention clips (2) also located in

SH-EXP fitting kit.

SH-EXP Add On Manifold

STEP 6

With the SH-EXP expansion head in hand, lubricate o-rings with water and

securely insert into the modular manifold by pushing towards the left

until seated. Complete by installing front and rear clips. (Refer to Appendix

A). Fasten bracket to the wall.

STEP 7

Conversion is now complete. (Refer to equipment start up procedure page 5).