Bose CINEMATE 1 SR Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Sistema de cine en casa Bose CINEMATE 1 SR. Bose CINEMATE 1 SR 16 páginas. Home theater speaker system
También para Bose CINEMATE 1 SR: Manual de instalación (20 páginas), Manual de instrucciones (44 páginas), Manual de instalación (40 páginas)
Imprimir página
CARE
AND
MAINTENANCE
No sound
Sound but no
picture, or sound
and picture do not
match
• Make sure the CineMate ® system is turned on and that the speaker array
power indicator
is on (solid white).
• Make sure the CineMate system is not muted.
• Increase the volume.
• Verify the wireless connection
between the speaker array and the
Acoustimass ® module:
• Press the ADAPTiQ ® button
behind the sliding cover on the end of
the speaker
array.
• The status indicator
should glow orange for 10 seconds
if the wire-
less connection
is good.
• If the speaker array status indicator
is blinking orange:
• Check that the Acoustimass
module
is plugged
into a live AC wall
outlet and the status indicator
is glowing
orange.
• Perform the pairing
procedure.
See "Pairing
the Acoustimass
®
module
with the speaker
array" on page 14.
• Try moving
any possible
sources
of wireless
interference,
such as a
wireless
computer
network
router, another wireless
device,
or a
microwave
oven, further
away from the CineMate
system.
• Make sure all cable connections
are correct and secure on the speaker
array, TV, and other connected
sources.
Refer to the "Product
Overview"
in the setup guide.
• Check that the correct TV input is selected.
See "Changing
the source
control mode" on page 7.
• Check that the TV's audio output
is enabled. See your TV owner's guide
for information.
• If the speaker array is connected
to a TV output labelled VARIABLE
(VAR), make sure the TV's internal speakers are turned off, the TV
volume is turned up, and the TV is not muted.
• Make sure there is an audio connection
from your sources to both your
TV and the speaker array.
• Make sure the TV is turned on.
• Make sure that the audio output on the TV is connected
to the TV audio
input on the speaker array. Refer to "Putting the system together, Step 1"
in the setup guide.
• If you are using the AUX connections
on the speaker array, make sure
that the audio outputs from your sources are connected
to both your TV
and the AUX connectors
on the speaker array. Refer to the "Product
overview"
in the setup guide.
12 - English