Bose Lifestyle 38 Series III Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Sistema de cine en casa Bose Lifestyle 38 Series III. Bose Lifestyle 38 Series III 25 páginas. Personal music center ii - owner's guide
También para Bose Lifestyle 38 Series III: Manual (29 páginas), Manual del usuario (24 páginas), Manual del usuario (13 páginas), Manual de configuración rápida (3 páginas), Manual del usuario (30 páginas)
Imprimir página
R
EFERENCE
Accessories
Troubleshooting
Problem
What to do
No sound
• For both the transmitter and the receiver, make sure:
•
Above problem
• Move the receiver and transmitter closer together.
persists and the
• Move the receiver, the transmitter, or both so the transmission path between them does not
Status LED lights
are not solid green
• Check to see if the Status LEDs turn green as a result of the above efforts. For details, refer to
Interference with
• For interference with a Wifi network, use the Channel button on the connection panel of the
a WiFi network,
telephone, TV,
or other electronic
• For interference with a telephone, TV or other electronic device, move the transmitter or
device
Interference from a
• Reposition the transmitter so it is in a more open area.
microwave oven
• Move the receiver farther from the microwave.
10
Bose offers additional receivers as well as extension/expansion cables and adapter kits for
use with the Bose
®
link AL8 Homewide Wireless Audio Link.
For further information, contact your Bose dealer or Bose Customer Service. For Bose
contact information, refer to the address sheet included in the carton.
– the audio source is plugged in, turned on, and working.
®
– the Bose
link A cable is securely connected at both ends. Refer to "Making the connec-
tions" on page 6.
– the small connector end of the power cord is inserted firmly into the AC Power jack on the
connection panel and the power pack is plugged securely into a working AC outlet.
– the Setup code switches on the connection panel of the transmitter and the receiver are set
identically. There are four options: 1 & 2 up; 1 & 2 down; 1 up & 2 down; 1 down & 2 up.
– the Status LEDs are lit a solid green to indicate solid communication between the two parts.
If not, refer to the next Problem in this table.
For the expansion room products, make sure:
– the system, amplifier, or powered speaker is plugged in and turned on. On an SA-2 or SA-3
amplifier in that room, make sure the status LED is lit to indicate the amplifier is working.
– the room code is set on the Bose link remote control or PERSONAL
match the room codes on the amplifier or powered speaker and are unique to this expansion
room.
– the house code is set on the Bose link remote control or PERSONAL music center II to
match the house code of the LIFESTYLE
intersect with large metal objects (like a refrigerator), impervious construction materials (like
thick masonry) or other obstructions (like a pool of water).
"Check the indicators and settings" on page 8.
transmitter to alleviate the problem. For details, refer to "The transmitter Channel button" on
page 9.
receiver farther from the device.
Français
Español
®
system in the main room.
English
®
music center II to