Bose Lifestyle Music Center Manual de instrucciones - Página 36

Navegue en línea o descargue pdf Manual de instrucciones para Sistema de cine en casa Bose Lifestyle Music Center. Bose Lifestyle Music Center 46 páginas. Home entertainment systems with vs-2 video enhancer
También para Bose Lifestyle Music Center: Manual de instrucciones (48 páginas), Manual de instrucciones (48 páginas), Manual de instalación (38 páginas), Manual del usuario (19 páginas), Manual del usuario (29 páginas), Manual de instalación (44 páginas), Manual del usuario (42 páginas), Información de configuración (1 páginas), Manual del usuario (26 páginas), Manuales de expansión (38 páginas), Manual de instrucciones (42 páginas), Manual de instrucciones (48 páginas), Manual del usuario (12 páginas), Manual de inicio rápido (8 páginas), Manual de instalación (30 páginas), Manual de instalación (39 páginas)

Changing

the house

code

settings

Each LIFESTYLE ® remote control uses a system of matching house codes to communicate

with its corresponding

media center. If commands given from your remote ever conflict with

those of another nearby LIFESTYLE ®system, you can easily set a new house code for your

system and its remote control(s) by doing the following:

Open the remote control battery cover and locate the miniature switches (Figure 13).

Move one or more of switches 1,2, 3, or 4 in the opposite direction from its current

setting. Use a paper clip, ball point pen, or similar object.

Note: DO NOT change any other switch settings. Moving other switches may cause your

remote to not control your system.

Replace the battery cover.

Lift the media center door and press the All Off button.

Press and hold the Store key. Your current house code will appear in the media center

display window in the form of four rectangles which represent the positions of switches 1

through 4:

HOUSECODE:

Current house code = 0 0 0 0 (Switches 1 - 4 down.)

While holding the Store key, press any key on the remote control.

The display will change to show the new house code to confirm recognition of the

new code:

NEW HOUSECODE: "..

"..

New house code = 1 0 1 0

(Switch 1 up, 2 down, 3 up, and 4 down.)

Release the Store key. The system remains off.

If you have additional remote controls, change the switches to match those of the first

remote control. It is not necessary to repeat steps 4-8.

Note:

To verify your system's house code, press Store while the system is off. The display

confirms the settings of switches

1-4.

Figure

Miniature house code

switches

House code switches (1-4).

Shown as set at the factory:

all switches down.

October 30, 2001

AM259 776_O1_V.pdf