Bose SoundTouch 520 Manual del usuario - Página 34
Navegue en línea o descargue pdf Manual del usuario para Sistema de cine en casa Bose SoundTouch 520. Bose SoundTouch 520 40 páginas. Series ii
También para Bose SoundTouch 520: Manual del usuario (22 páginas), Manual de inicio rápido (2 páginas)
Imprimir página
Care and Maintenance
Problem
Remote control
is inconsistent or
does not work
System does not
sync with the
correct source /
selects the incor-
rect source after
delay (CEC)
CEC
inconsistent or
does not work
Poor or distorted
sound
Intermittent sound
34 - English
What to do
• Match the + and – symbols on the batteries with the + and – mark-
ings inside the compartment (see page 18).
• Replace the battery (see page 18).
• Press the volume button on the remote control and see if the correct
source button flashes.
• Remove the protective film from the console.
• If using CEC:
- Point the remote control at the console.
- Use the Alternate On setting (see page 31).
- Disable CEC on your system (see page 31) and program the
remote to control your source (see page 23).
• If you have programmed the remote to control your source:
- Point the remote control at the appropriate source.
- Ensure you have entered the correct code for your source's brand.
- Program the remote with another code (see page 23).
• Use the Alternate On setting (see page 31).
• Disable CEC on your source (refer to your source owner's guide for
more information).
• Disable CEC on your system (see page 31) and program the
remote to control your source (see page 23).
• Use the Alternate On setting (see page 31).
• Disable CEC on your source (refer to your source owner's guide for
more information).
• Disable CEC on your system (see page 31) and program the
remote control (see page 24).
• Remove all protective films from the system.
• Secure all cable connections on the soundbar, TV, and connected
sources.
• If you see the error message Cannot find Acoustimass:
- Plug in the Acoustimass
- Pair the Acoustimass module with the console (see page 35).
• If using the analog or
source.
• Factory reset the system (see page 36) and run the ADAPTiQ
audio calibration (see page 20).
• Secure all cable connections on the soundbar, TV, and connected
sources.
• Move system away from potential interference, such as a wireless
router, cordless phone, television, microwave, etc.
• Toggle CEC between Alternate On and Default On (see page 31).
module.
®
connector, decrease the volume on your
®