18. Use proper power sources - Plug the product into
a proper power source, as described in the operating
instructions or as marked on the product.
19, Avoid power lines - Use extreme care when
installing an outside antenna system to keep from
touching power lines or circuits, as contact with
them may be fatal. Do not install external antennas
near overhead power lines or other electric light or
power circuits, nor where an antenna can fall into
such circuits or power lines.
20. Ground all outdoor antennas - If an external
antenna or cable system is connected to this
product, be sure the antenna or cable system is
grounded. This will provide some protection against
voltage surges and built-up static charges.
Section 810 of the National Electrical Code ANSI/
NFPA No. 70 provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna-discharge
unit, connection to
grounding electrodes, and requirements for the
ground electrode. Refer to the antenna grounding
illustrationon this page.
Antenna
grounding
Example of antenna grounding as per National Electrical
Code, ANSl/NFPA 70.
_*_
Antenna lead in wire
/
Lirouna clamp_
L I
Antenna discharge unit
/
_[_(NEO
Section
810-20)
I
....
// Grounding
conductors
_
__Ground
cl(aNE_:
ecti°n
810-21)
'--*_Power
service grounding
electrode system
(NEC ART 250,
Part H)
Note to CATV system
installer
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC (of USA)
SERVICE BULLETIN
Better sound through research®
Bulletin
Part Number:
264563-B6
Product:
Bose ®AV28 Media Center (part of the Lifestyle ® 28 and 35 system)
Subject:
DVD Region Codes 3-6 and select
Region 2 offerings.
Disposition:
Change
the region code at the customer's
request.
Symptom:
A customer
moves from one DVD region to another
and needs to have the media center's
region
code changed.
Reason:
To control the release
of movies,
DVD disc manufacturers
region code DVDs and require
DVD player
manufacturers
to design their players to only play DVDs manufactured
for a particular
region
of the world. If a
customer
moves from one region to another, the region code of the media center
needs to be changed
to match
the region
code of DVD discs sold in that particular
region.
Solution:
The Bose Lifestyle ® 28 and 35 systems
are sold worldwide.
We recognize
the fact that customers
may
move from one DVD region to another.
By pushing
the following
buttons
on the remote
control,
you can update
the media center to be compatible
with the new region. Perform
the following
two procedures.
1. Initialize
the Media Center:
To initialize
the media center
so its region code can be changed,
press the following
buttons
in the sequence
below on the media center's remote
control.
Important
Note: This procedure
only needs to be performed
once to initialize the media center.
• Seek Forward
Button (right arrow)
• Tune Up Button (up arrow)
• Shuffle
Button
• Stop Button
• Mute Button
2. Set the Region
Code:
With the AV28 Media Center on, open the DVD tray and insert a DVD disc. While the DVD tray is open, press
the following
buttons
in the sequence
below on the media center's
remote control.
• Stop Button
• Shuffle
Button
• Region number
of the DVD discs sold in that region
(i.e. for region 4, press the number 4 button)
• Enter
The DVD tray will automatically
close and the DVD disc will begin to play.
Important
Note:
If a certain
DVD disc does not play, this procedure
may need to be performed
again and
each time that DVD disc is played.
Important
Note:
Currently
this capability
is only available
on Lifestyle ®28 and 35 systems
sold in DVD region 3-6 and select
region 2 offerings.
Early production
units may not respond
to this procedure
and will require
a software
update
to have this capability.
Contact
Bose Corporation
in your country
for software
update instructions.
Date Issued: 10/2002
Bose
Corporation;
The
Mountain,
Framingham,
Ma,
01701-9168
For Technical
Assistance
Call 1-800-233-4408
Service
documentation
available
online
at http:llserviceops,bose.com
SERVICE BULLETIN
Bulletin
Part Number:
264563-B6
Product:
Bose ®AV28 Media Center (part of the Life
Subject:
DVD Region Codes 3-6 and select Region
Disposition:
Change the region code at the custom
Symptom:
A customer
moves from one DVD region
code changed.
Reason:
To control the release
of movies,
DVD disc
manufacturers
to design
their players to only play D\
customer
moves from one region to another, the reg
the region code of DVD discs sold in that particular
r
Solution:
The Bose Lifestyle ®28 and 35 systems
a
move from one DVD region to another. By pushing t
the media center to be compatible
with the new regi
1. Initialize
the Media Center:
To initialize the media center so its region
code ca
below on the media center's
remote
control.
Important
Note: This procedure
only needs to be
• Seek Forward
Button (right arrow)
• Tune Up Button
(up arrow)
• Shuffle
Button
• Stop Button
• Mute Button
2. Set the Region Code:
With the AV28 Media Center on, open the DVD tr
the following
buttons
in the sequence
below on th
• Stop Button
• Shuffle
Button
• Region number
of the DVD discs sold in that re(
• Enter
The DVD tray will automatically
close and the DV
Important
Note:
If a certain DVD disc does not pl
each time that DVD disc is played.
Important
Note:
Currently
this capability
is only available
on Lifestyle _
region 2 offerings.
Early production
units may not re.
to have this capability.
Contact
Bose Corporation
in
Date Issued:
10/2002
Bose Corporation; The
For Technical
Service
documentation
av
Imprimir página