Bose S1 Pro Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Sistema estéreo Bose S1 Pro. Bose S1 Pro 19 páginas. Multi-position pa system
También para Bose S1 Pro: Instrucciones de instalación (2 páginas), Manual del usuario (15 páginas)

Imprimir página

System Setup

Connecting Power

Make sure the power switch is in Standby ( ).

2. Plug the power cord into the connector on the S1 Pro.

3. Plug the other end of the power cord into a live electrical outlet.

4. Power on the system by turning the power switch to On ( ).

Connecting Sources

Before connecting a sound source, adjust the appropriate channel Volume control fully counterclockwise.

Channel 1 & 2 Controls

Channel 1 and 2 are for use with dynamic microphones, guitars, keyboards or other instruments.

Connect your sound source to the Channel input of either Channel 1 or 2.

2. Apply a ToneMatch preset by adjusting the ToneMatch switch for the appropriate channel to

microphones or

Note: ToneMatch® presets automatically optimize the sound of your microphone or instrument.

3. Adjust the Volume control clockwise—while speaking into the microphone or playing your instrument—

until the volume has reached the desired level.

4. Adjust the Treble, Bass and Reverb controls—while speaking into the microphone or playing your

instrument—until the desired effect is achieved.

Channel 3 Controls

Channel 3 is for use with Bluetooth®-capable devices and line-level audio inputs.

Bluetooth Pairing

Turn on the Bluetooth feature on your mobile device.

Note: The Bluetooth feature is usually found in the Settings menu.

2. Press and hold the Bluetooth Pair button for two seconds.

Note: When ready to pair,

3. Select your Bose® S1 Pro system from the device list.

Note: When the device pairs successfully,

Note: If your paired phone receives a call, any music playing will be paused and the ring will come through the

phone; no calls or notifications will come through the S1 Pro.

Aux Input

Connect a line-level sound source to the Aux input via a 3.5 mm (⅛") cable.

Note: Anything connected via the Aux input will automatically override any paired Bluetooth device.

8 • English

for other instruments.

will flash white.

will turn solid white.

for

S1 Pro System • Owner's Guide