AWMDC_OG.book Page 16 Monday, May 5, 2003 11:03 AM
Maintaining Your System
Troubleshooting
Problem
What to do
No system operation
• Make sure the power cord for the Acoustic Wave
plugged in both at the changer jack and at the wall outlet.
No sound or
• If the Acoustic Wave
sound is muffled
sure that AUX is displayed as the selection on the Acoustic Wave
• If the sound source is an auxiliary component connected to the multi-disc changer,
• Make sure that both the Acoustic Wave
music system are plugged into functioning power outlets, and are turned on.
• Check the connection of the Acoustic Wave
two RCA connectors are firmly inserted, red to red, and white to white, into the AUX IN
jacks on the Acoustic Wave
to your Acoustic Wave
• If the sound source is an auxiliary component connected to the multi-disc changer,
• Make sure nothing is blocking or preventing the IR signals emitted by the multi-disc
changer from reaching the receiver on the front of the Acoustic Wave
Refer to "Seating your Acoustic Wave
page 5.
CD skips
• Does the unit get bumped in its current location? If so, move it to a more protected
location.
• Check the CD for smudges or dirt. Wipe the CD (NOT in a circular pattern, but straight out
from the center) to it clean off.
CD does not play
• Make sure you have selected the changer or the CD player.
• If you have selected the changer, make sure AUX is the selection shown on the Acoustic
Wave
console.
• Make sure there is a CD is in the selected changer slot or in the CD player on the Acoustic
Wave
• Make sure CD is selected on the display of the Acoustic Wave
A CD is playing, but none
• Check to see if the CD player in the Acoustic Wave
of the multi-disc changer
instead of the changer.
LEDs is lit
Customer Service
For additional help in solving problems, contact Bose
list on the inside back cover of this guide.
16
®
multi-disc changer or a component connected to it is playing, make
make sure that component is plugged in and turned on.
®
®
music system. Refer to "Connecting the multi-disc changer
®
music system" on page 6.
make sure the connections are fully and firmly inserted into jacks on both the changer
and on the component.
®
music system on the multi-disc changer" on
®
music system display. If it is not, press the AUX button on the music system
®
music system.
®
multi-disc changer is completely
®
music system display.
multi-disc changer and the Acoustic Wave
®
music system to the changer. Make sure the
®
music system.
®
music system.
®
music system is on and playing,
®
customer service. Refer to the address
®
Imprimir página