Bose Acoustic Wave Series II Manual - Página 4

Navegue en línea o descargue pdf Manual para Media Converter Bose Acoustic Wave Series II. Bose Acoustic Wave Series II 46 páginas. 4x4 mic/line input/output card
También para Bose Acoustic Wave Series II: Manual del usuario (20 páginas), Manual del usuario (20 páginas), Instalación (3 páginas), Manual (2 páginas)

Imprimir página

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the user's authority to operate

this equipment.

This device complies with part 15 of the FCC Rules and with ISED Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

CAN ICES-3(B)/NMB-3(B)

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is

in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation

(EU) No. 801/2013.

Required Power State Information

Power consumption in specified power mode, at

230V/50Hz input

Time after which equipment is automatically

switched into mode

Power consumption in networked standby if all wired

network ports are connected and all wireless network

ports are activated, at 230V/50Hz input

Network port deactivation/activation procedures.

Deactivating all networks will enable standby mode.

REG U LATORY I N FO R MAT IO N

Bluetooth®: Deactivate by clearing the pairing list by pressing and

holding the Bluetooth button for 10 seconds. Activate by pairing with a

Bluetooth source.

*product does not utilize a networked standby mode for a Bluetooth

connection and does not have the ability to be configured to a network

via Wi-Fi® or Ethernet.

Power Modes

Standby

≤ 0.5 W

< 2.5 hours

N/A

E N G

Networked Standby

N/A*