Airtecnics K7 770 HEPA Manual de instalación, funcionamiento y mantenimiento - Página 13

Navegue en línea o descargue pdf Manual de instalación, funcionamiento y mantenimiento para Sistemas de filtración de agua Airtecnics K7 770 HEPA. Airtecnics K7 770 HEPA 16 páginas.

Imprimir página

Electrical power supply

If the equipment is not working, the error is most likely due to an incorrect

terminal power.

1 - Check that it has been connected to a live electrical outlet.

2 - Check that the current is compatible with the equipment and that the terminal block ca-

bles are connected according to the electrical diagram specified in this manual.

3- Check that voltage (230Vx1) reaches the equipment and, if not, check the power cables.

3.1 - If the equipment has voltage, but the fan does not rotate, check if there is 5.5V in

continuous between the yellow and black cables.

3.2 - In case there is no 5.5V, check that there is 10V in continuous between the oran-

ge and black cables. If there is 10V, one of the resistors has been damaged and must

be replaced.

3.3 - If there is no 10V, the fan's 10V signal is damaged, the fan needs to be replaced.

Filters replacements

If the equipment has a luminous cor vermella signal light on, it means that the filters are

fully dirty and must be replaced (page 10).

FAULTS AND SOLUTIONS

Instruction manual - Purifier

K7 770 HEPA