Drolet ALASKA 2000 Manual de instalación y funcionamiento - Página 10

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Estufa Drolet ALASKA 2000. Drolet ALASKA 2000 16 páginas. Oil burning stove

Imprimir página

• Place the flow regulating handle on the "1" position, as soon as the oil enters the burner

return to "0" position.

• Open the door and pore into the burner 2 to 3 once (75 ml) of lighting gel or wood

alcohol.

NOTE : USE OF LIGHTING GEL IS BETTER OF A SAFE IGNITION.

• With a long wood match or a BBQ lighter ignite carefully and close the door.

• After a couple of minutes (before alcohol goes out) the burner and the chimney are hot,

place the flow regulator handle on "1" position.

Note : Do not leave matches or other materials in the burner in order to keep it

clean. It allows a better combustion.

IF YOU MISS THE STOVE'S LIGHTING, ALWAYS WAIT FOR THE

BURNER TO COOL DOWN TO ROOM TEMPERATURE BEFORE

USING BURNING ALCOHOL AGAIN OR ELSE, USE COMMERCIAL

LIGHTING MATERIAL (SOLID) OR A PIECE OF COTTON DAMPED

IN OIL.

IF, FURTHER TO SOME MISOPERATION, THE BURNER IS FILLED

WITH IMPORTANT QUANTITIES OF OIL, ALL OF THE OIL MUST

FIRST BE REMOVED BEFORE LIGHTING THE STOVE AGAIN.

•

Always wait 10 minutes minimum before increasing the flow (between each position). This allows

flames to stabilize and avoid suiting up. No waiting is needed to decrease the flow.

•

Cette précaution n'est cependant pas nécessaire pour diminuer le débit de carburant.

LIGHTING (CONT'D)

CHANGING INTENSITY

Page 9 of 15