Dromex DH-HHCARRIER Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Dispositivo de protección Dromex DH-HHCARRIER. Dromex DH-HHCARRIER 2 páginas.

Imprimir página

(HARD HAT ASSEMBLY) CARRIER

HHA CARRIER

Description

The Dromex® HHA carrier system is a universal helmet mounted face shield

and earmuﬀ combination that's easy to attach and detach, provides optimum

hearing and face protection against liquid splash, medium impact particulate,

molten metal and resistance to penetration of hot solids.

Compatible with most industrial helmets, these combination earmuﬀs and

faceshields are suitable for use in construction, general industry, mining, oil

and gas, utilities airports, excavation equipment handling, generators,

machining, grinding, woodwork and drilling applications.

Special Instructions

EARMUFFS:

• Do not share

earmuﬀs

as ears can be exposed to ear infections.

• Product should be worn properly at all times in noisy surroundings.

• The earmuﬀs should be ﬁtted, adjusted and maintained in accordance with

instructions provided on this packaging.

• If the recommendations are not adhered to, the protection aﬀorded by the

product will be severely impaired.

• This product may be adversely aﬀected by certain chemical substances;

avoid the use of agents (i.e. solvents and other disinfectants) that are known

to be harmful to the wearer and/or the earmuﬀ.

• Regularly inspect for tears or cracks and replace if service ability is suspected

to be aﬀected.

• Sounds above 85dB are harmful to the ears.

• Spectacle frames and hair between the ear pad and head may aﬀect the

performance of the ear protector.

VISOR:

• This eye protector is suitable for use to the lowest marking on the brow guard

or visor. Clear material face shields are not intended for welding use.

Safety spectacles with side shields are used as primary protection to shield the

eyes from heat hazards. To adequately protect the eyes and face from high

temperature exposure, use safety spectacles in combination with a heat

protective face shield. Only shade 5 green material face shields are suitable for

welding use. Wire mesh face shields are not suitable for protection against

high speed particles, liquid splash, molten metal splash, hot solids, electrical

hazards, furnace or welding use.

• Optical class 3 oculars are not intended for long term use.

Compliance & Conformity

Manufactured to EN 352-1:2002 and EN 352-3: 2002, Hearing Protective

Equipment, CE certiﬁcate 676978 and EN166:2001 and EN 1731:2006,

Personal Eye Protection: Face shields, CE certiﬁcate 682750 as per the

requirements of Eu Type examination certiﬁcate, 2016/425 Directive

89/686/EEC by BSI.

Speciﬁcations

Style:

Helmet mounted detachable face shield and earmuﬀs

with adjustable cups

Earmuﬀs:

• Material earcup: ABS (Acrylonitrile butadiene styrene)

earmuﬀ cup with a foam cushion and soft leather skin

covering

• Material earmuﬀ helmet connector: POM

(Polyoxymethylene), nylon and glass ﬁlled polymer

housing, with a steel screw

• Noise attenuation data: SNR 28 dB

H 31 dB

M 26 dB

L 19 dB

Material visor:

• Material Visor consists of polycarbonate, 1mm thick

• Markings on visor:

EN 166: 2001, 1.B.9, Z87+

1 = ± 0, 06 DIOPTRES PERMANENT WEAR

B = Medium Energy high speed particles 120m/s

9 = Areas of use, Molten Metals and hot solids

Material carrier:

• Material HHA carrier: ABS (Acrylonitrile butadiene

styrene)

• Markings on carrier frame:

EN 166: 2001, 1.B.9, Z87+

= ± 0, 06 DIOPTRES PERMANENT WEAR

= Medium Energy high speed particles 120m/s

= Areas of use, Molten Metals and hot solids

= Suitable for protection against liquid droplets

Packaging, Storage & Obsolescence

• Interex Earmuﬀs packed in individual boxes and sold as 10 units in a carton.

• HHCARRIER packed in individual polybags and sold as 20 units in a carton.

• HHPCVISOR wrapped in individual packaging and sold as 20 units in a carton.

EARMUFFS:

User's instructions included in the polybag.

When not in use or during transportation, the earmuﬀ should be stored in a

container such that it out of direct sunlight, away from chemicals and abrasive

substances and cannot be damaged by physical contact with hard surface

and items.

VISOR:

User's instructions included in the polybag.

When not in use or during transportation this face shield should a container

that is out of direct sunlight, away from chemicals and abrasive substances

and cannot be damaged by physical contact with hard surfaces/items.

Do not store outside temperature range of -20"C to +50°C or with humidity

above 90%RH.

Cleaning & Maintenance

EARMUFFS:

After each use wash and rinse with warm soapy water.

Clean and dry earmuﬀs when not used for a long period of time.

Solvent or abrasive cleaner should not be used.

Cushions may deteriorate with use and should be examined at frequent intervals

for cracking and tears.

Discard immediately when headband is broken, cups are damaged and cushions

are missing, as the earmuﬀ can no longer provide full hearing protection.

VISOR:

To maintain the face shield in the best possible condition do not use solvents or

abrasive materials to clean.

Rinse in a weak solution of mild detergent in clean water and dry with a soft cloth.

Scratched or damaged visors should be replaced. Replacement visors are available.

Should any diﬃculties be encountered, connecting or disconnecting the face-

shield, contact the manufacturer.

Shelf life

• Under normal circumstances the earmuﬀ should oﬀer adequate protection

for 2 -3 years.

• Discard if noticeable damages is prevalent

• Visor :

• Under normal circumstances the face shield should oﬀer protection for up to

5 years.

Materials

None of the materials used in the manufacture of the HHA system are known

to adversely aﬀect the hygiene or health.

Dromex: Unit 1, 1 Blase Road, New Germany, 3620, South Africa

T. +27(31) 713 1960 E. [email protected]