Drone Sky Hook ARROW DSH-DRDP2-P4-3 Manual de instalación rápida

Navegue en línea o descargue pdf Manual de instalación rápida para Accesorios para drones y cuadricópteros Drone Sky Hook ARROW DSH-DRDP2-P4-3. Drone Sky Hook ARROW DSH-DRDP2-P4-3 2 páginas. Professional release & drop device for dji phantom 4 / phantom 3

Imprimir página
Model numbers: DSH-SRD2-P4-3; DSH-DRD2-P4-3; DSH-SRDP2-P4-3; DSH-DRDP2-P4-3
Quick Installation Guide - DJI Phantom 4 (all models)
1
Slide the alignment pin brackets on
both of the rear landing gear until
they lock in place
4
Press down the other side of the
Drone Sky Hook Arrow until it locks
to the landing gear
7
Slide the LED Sensor into the
narow section of the drone's arm
9
Fully insert the plug of the LED
Sensor cable into the 'SENS' port
on the Drone Sky Hook Arrow
DRONE SKY HOOK Ltd.
For Installation and Operation videos visit
Drone-Sky-Hook - ARROW
Professional Release & Drop device for DJI Phantom 4 / Phantom 3
2
Align the Drone Sky Hook Arrow's
hole with the aligment pin
5
The Alignment pins on both sides
shoud be fully inserted
8
The LED Sensor should fully cover the drone's lens
10
3
Press down the Drone Sky Hook
Arrow on one side until it locks to
6
The LED Sensors is installed under
the front right electric motor
Correct
Wrong
ALL SET !
www.droneskyhook.com/product-support
v1.2
the landing gear
www.droneskyhook.com