Drone Sky Hook DSH-SRDP1-P4 Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Accesorios para drones y cuadricópteros Drone Sky Hook DSH-SRDP1-P4. Drone Sky Hook DSH-SRDP1-P4 7 páginas. Single/dual release & drop for phantom 4 / phantom 3 series drones, single/dual release & drop plus for phantom 4 / phantom 3 series drones

Imprimir página

Operation Mode 2 – Drone Remote Controller C1/C2 Button and/or DJI App

Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs

Remote Controller

C1 / C2 Button

DJI App

Settings – Main Controller Settings –

Advanced Settings

Operation Mode 3 – Manual – FUNC button on DSH unit

DSH Release & Drop unit

IMPORTANT NOTE: At the end of each operation wait 3 seconds for the execution your

command and before the initiation of the next command (False Command Avoidance Algorithm

(FCAA)).

Press C1 or C2 twice in quick succession (while

maintaining about 0.5-1 second between each press) to

drop the payload.

To set the drop wheel back to its previous position, again

press C1 or C2 twice in quick succession (while

maintaining about 0.5-1 second between each press).

In the App menu switch the drone's front LEDs ON and

then OFF or OFF and then ON.

(Total of one ON-OFF or OFF-ON cycle) to simulate the

operation of the C1 or C2 buttons on the drone's remote

controller (see above).

Maintain about 0.5-1 second idle duration between each

switch operation.

Press twice the device's FUNC button to simulate the

operation of the C1 or C2 buttons on the drone's remote

controller (see above).

Maintain about 0.5-1 second idle duration between each

operation of the FUNC button.

Operation